Bykski Full Coverage GPU Water Block and Backplate for Gigabyte AORUS RTX 3070Ti Master 8GB (N-GV3070TIAORUS-X)

SKU: N-GV3070TIAORUS-X
Availability : In stock, In Boise ID USA Pre-Order Now Out of stock
$189.99 USD
Order in the next [totalHours] hours %M minutes to get it between and

HURRY! ONLY LEFT IN STOCK.

Description

This full coverage block directly cools the video cards core (GPU), graphics memory (RAM), and voltage regulator modules (VRM). By directly cooling these components you can achieve great temperatures along with the ability to reach higher overclocks or extend the overall lifespan of your card by running at below factory temps.

The block is constructed of high purity copper that is electroplated to prevent oxidation. A high flow design is used to allow multiple blocks to run in series. Top and bottom ports can be used to configure parallel or serial designs in multi block set ups.

Specifications
  • Block Material: Electroplated High Purity Copper / Clear Acrylic
  • Backplate Material: Black Anodized Aluminum (not in contact with coolant)
Compatibility
  • (Including but not limited to the following models)
  • Gigabyte AORUS RTX 3070Ti Master 8GB
  • Please check over the entire PCB picture after narrowing your selection to ensure compatibility. If you have any questions, please contact support for confirmation.
  • Compatibility based on these circuit board designs only
  • Fittings: G 1/4in. Thread
Parts Included
  • 1x Full Coverage GPU Water Block
  • 1x Backplate
  • 2x Stop Fitting
  • 1x Mounting Hardware
  • Thermal grease
  • 1x 5v A-RGB (RBW) Light
  • (Warning: Addressable RGB (RBW) is 5V and is ONLY compatible with Addressable RGB (RBW) components. RGB is 12V and is ONLY compatible with RGB components. Mix and match will NOT work and will cause damage.
Warnings

This is a repair or replace only item. Returns not accepted on compatibility issues or if block has had water/fluid run through it.

Manufacturer reserves right to alter block design to expand compatibility. Delivered item may not 100% match pictured item. Product does NOT come with English instructions. Please see product gallery images for install guide if available. Generally, thermal pads should be installed on the card where the block has corresponding raised contact points with the exception of the GPU core, which uses thermal paste. Installing pads on other components can lead to improper contact and poor performance.

Not responsible for any damage caused by or when using this product. Please use at your own risk.

Reviews | Q&A

Customer Reviews

Based on 2 reviews
50%
(1)
0%
(0)
50%
(1)
0%
(0)
0%
(0)
V
Vinee
Awesome

Works great! At 100% usage, my gpu only goes up to around 60-70°C

D
D. W.
Great product but beware RGB

The block itself is great. The temps on my 3070Ti have dropped nearly 12 degrees from the stock cooling it came with. Installation was easy and the instructions were clear and detailed.

MY ONLY GRIPE:
The cable for the RGB has a terrible solder join on the acrylic part of the block. After installing the block on my GPU and then fitting it into my case I found that this RGB cable simply fell off (presumably from all the back and forth strain placed on the cable when moving it out of the way). The solder join is hilariously inadequate and there is zero protection from undue or even repeated strain of moving the cable around whilst fitting the block. This was a bit disappointing given that the build quality of the rest of the block is excellent.. it's a huge let down for this product to "fall on the sword" of what is a flimsy cable and a very ill thought connection.... I would have given it 5 stars but it only gets 3, loses 1 star for the shoddy cable join and another lost star because I can't self-repair and now my GPU has ZERO lighting which basically kills the entire build... still a decent product but fell over at the final hurdle.

UPDATED: 10-JAN-2023
After installing the block, I noticed a week later that the GPU was running at it's base clock most of the time - it was not going any higher than about 1600Mhz (with the stock cooler it would easily get up to and and hold a frequency of 2010-2025Mhz. Following some troubleshooting, I figured out that the GPU hotspot temperature was anywhere between 104 and 108 degress Celcius. I had a look at the stock Gigabyte cooler the card came with and I noticed that there was an additonal thermal pad applied to the mosfet/VRMs (Labelled R15) not sure what they are. The stock Gigabyte cooling assembly also has a 5mm thick thermal pad on the back side of the GPU chip (I assume these are MLC's and Poscaps) this pad was about 20-25mm squared in size.

What I did in the end was add a thermal pad across the R15 components (the yellow boxed area in the provided image - the red boxes are the area noted in the bykski guide for thermal pad placement) and I also added the large thermal pad square from the original cooler to the back side of the GPU chip where the MLCs/Poscaps are).

THE END RESULT:
GPU temperatures went down from about 86-89 degrees celcious to about 70-73 degrees celcius and the GPU hotspot went down from 104-108 to 80-83 degrees celcius and the card is no longer thermal limited and now consistently hits 2010-2025 Mhz.

Hopefully Bykski support will read this AND amend their guide as well as include the additional thermal pads I have mentioned.

Hi Denver,
We actually carry replacement LED strips in case of accidental damage here: https://www.bykski.us/collections/rbw-lights
Be sure that the part number matches exactly, the V2 strips are a new design that are physically incompatible with blocks that use V1 strips.

As for the thermal pad situation, I'd recommend sharing details directly with support, other customers have reported that it worked perfectly according to the guide. The R15 components are inductors and should not require thermal pad application, doing so can actually hamper contact with other components if the pads are too thick.

Return/Exchange/Shipping Policy

Return Policy for New Products:

For international customers please reference this page for duties/tax information.


Products returned for credit must be received within 30 days of the invoice, and a 15% restocking fee will apply. If your order was sent using "free shipping," the amount for outbound shipping will be deducted from your refund. If 30 days have passed since your purchase, unfortunately, we can’t offer you a refund or exchange.

All returned items must be in like new condition with all related parts including screws, manuals, etc. If you have lost, thrown away, scratched or opened sealed boxes or bags – a higher restock fee may apply upwards of 50%.

If a customer is misleading about the defect and evidence of incorrect install/use or tampering has occurred, a higher restock fee may be assessed or the return may be completely denied. A qualified Bykski.us technician will test each returned product for defects.

Bykski.us will not assess a restocking fee for defective products.

Sale items  or Pre-owned (if applicable)
Only regular priced new items may be refunded or returned, unfortunately sale items and Used/Pre-owned/Open box items cannot be refunded.

Returns will not be accepted without an RMA number provided from support@bykski.us. 

Return Shipping

Customers are responsible for ALL return shipping charges on merchandise for any reason. Unless otherwise noted, shipping on products and returns is non-refundable, and returning a product comes at the customer's expense. The customer will be responsible for paying for shipping products/orders back to PrimoChill.com. For no reason, do we refund the outbound shipping cost. If your order was sent using "free shipping," the amount for outbound shipping will be deducted from your refund.

Depending on where you live, the time it may take for your exchanged product to reach you, may vary.

Please ship using a carrier that provides a tracking number, insurance and proof of delivery. Bykski.us is not responsible for return items lost by the carrier. Valid proof of delivery must include the receipt signature of an authorized Bykski.us employee.

Erroneous Shipments
In the event an incorrect item is shipped in your order, the correct item / replacement will be shipped using the same method as the original order.

Damaged Items
:  All packages are fully insured at no additional charge.

If you receive a damaged package, you must notify us within 48 hours of receipt. Sending back damaged merchandise voids the shipping insurance and no credit will be given. Damaged packages must be held for five days with original packaging for carrier inspection.

Shipment Refusal

Shipping Policy

Selecting overnight shipping method will not ensure that your order ships same day and is not guaranteed.

Cancellations/Changes:

Once an order is placed on our e-commerce website, it cannot be canceled/changed or held. This is because our fully automated systems immediately start processing the order, which cannot be stopped or reversed. Therefore, we advise customers to double-check their orders before making a purchase.

Additionally, we would like to emphasize that our e-commerce website ships 98.5% of orders on the same day they are placed by 2:00 pm MST. Allowing cancellations after an order is placed would significantly slow down our shipping process and potentially affect the delivery times for other customers.

We understand that it can be frustrating to be unable to cancel an order, but we ask for your understanding in this matter. By adhering to our cancellation policy, we can ensure that our automated systems and shipping processes continue running smoothly, allowing us to provide fast and efficient service to all our customers.

We understand that sometimes mistakes can happen, and customers may accidentally order the wrong item or change their minds about a purchase. In such cases, we suggest that customers consider our return policy instead.

PRE-ORDER ITEMS

Most of the time pre-ordered items are newly released products and may be subject to price increases and feature changes as more information is provided to us the reseller. 

The item's packaging (dimensions, weight, additional handling, shipping rate changes), delivery schedule and included options are subject to change and therefore the original estimated price listed and delivery date may change once the final information is received. As we get more information about the packaging, pricing, and inclusions, the final features/pricing may change before fulfillment. 

In the event of a price change or feature change the customer will be notified immediately and will be given the option to cancel the order, change the order or pay additional funds to cover the increases.