{"title":"Special Order Items","description":"","products":[{"product_id":"bykski-n-as2080ti-strix-x-strix-x-full-coverage-gpu-water-block-clear-n-as2080ti-strix-x","title":"Bykski ASUS ROG STRIX GTX 2080Ti Full Coverage GPU Water Block - Clear (N-AS2080TI STRIX-X)","description":"\u003cp\u003eThe Bykski nVidia N-AS2080TI STRIX-X Full Coverage GPU Water Block is a work of art! This full coverage block, directly cools the video cards core (GPU), graphics memory (RAM) as well as the voltage regulator modules (VRM). By directly cooling these components you can achieve great temperatures! Along with these temperatures comes the ability to reach higher overclocks or extend the overall lifespan of your card by running at below factory temps.\u003c\/p\u003e\n\u003cp\u003eThe block is constructed of high purity copper that is electroplated to prevent oxidation. A high flow design is used to allow multiple blocks to run in series. Top and bottom ports can be used to configure parallel or serial designs in multi block set ups.\u003c\/p\u003e\n\u003ch5\u003eFeatures\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eFinest Craftmanship\u003c\/li\u003e\n\u003cli\u003eDesigned to Fit Standard G1\/4 Thread Fittings\u003c\/li\u003e\n\u003cli\u003eSLI\/Crossfire Compliant\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eSpecifications\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eModel:N-AS2080TI STRIX-X\u003c\/li\u003e\n\u003cli\u003eBrand:Bykski\u003c\/li\u003e\n\u003cli\u003eMaterial:Electroplated High Purity Copper \/ Clear Acrylic\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eCompatibility\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ci\u003e(Including but not limited to the following models)\u003c\/i\u003e\u003c\/li\u003e\n\u003cli\u003eCompatible with ASUS ROG STRIX GTX 2080Ti\u003c\/li\u003e\n\u003cli\u003e\u003ci\u003ecompatibility based on reference design only, block may not fit altered \/ super clocked and other third party variations that deviate from reference design.\u003c\/i\u003e\u003c\/li\u003e\n\u003cli\u003eFittings:G 1\/4 Thread\u003c\/li\u003e\n\u003cli\u003eStock Backplates:Due to mounting variances between cards, stock backplates not guaranteed to fit.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003e\u003cspan\u003eParts Included \u003c\/span\u003e\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003e1x Full Coverage GPU Water Block\u003c\/li\u003e\n\u003cli\u003e2x Stop Fitting\u003c\/li\u003e\n\u003cli\u003e1x Mounting Hardware\u003c\/li\u003e\n\u003cli\u003eThermal grease\u003c\/li\u003e\n\u003cli\u003e1x RGB LED\u003c\/li\u003e\n\u003cli\u003e(Warning: Addressable RGB (RBW) is 5V and is ONLY compatible with Addressable RGB (RBW) components. RGB is 12V and is ONLY compatible with RGB components. Mix and match will NOT work and will cause damage.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eWarnings\u003c\/h5\u003e\n\u003cp\u003e\u003cbr\u003eThis is a repair or replace only item. Returns not accepted on compatibility issues or block has had water\/fluid run through it.\u003c\/p\u003e\n\u003cp\u003eManufacturer reserves right to alter block design to expand compatibility. Delivered item may not 100% match pictured item. Product does NOT come with English instructions.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e PrimoChill is not responsible for any damage caused by or when using this product. Please use at your own risk.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"Bykski","offers":[{"title":"Default Title","offer_id":23153691099236,"sku":"N-AS2080TI STRIX-X","price":233.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0069\/8102\/5892\/files\/52e62247-7939-46b2-bcf5-7566e5601f5f.jpg?v=1781308831"},{"product_id":"bykski-galax-rtx-2070-gamer-full-coverage-gpu-water-block-clear-n-gy2070gamer-x","title":"Bykski GALAX RTX 2070 GAMER Full Coverage GPU Water Block - Clear (N-GY2070GAMER-X)","description":"\u003cp\u003eThe Bykski GALAX RTX 2070 GAMER Full Coverage GPU Water Block is a work of art! This full coverage block, directly cools the video cards core (GPU), graphics memory (RAM) as well as the voltage regulator modules (VRM). By directly cooling these components you can achieve great temperatures! Along with these temperatures comes the ability to reach higher overclocks or extend the overall lifespan of your card by running at below factory temps.\u003c\/p\u003e\n\u003cp\u003eThe block is constructed of high purity copper that is electroplated to prevent oxidation. A high flow design is used to allow multiple blocks to run in series. Top and bottom ports can be used to configure parallel or serial designs in multi block set ups.\u003c\/p\u003e\n\u003ch5\u003eFeatures\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eFinest Craftmanship\u003c\/li\u003e\n\u003cli\u003eDesigned to Fit Standard G1\/4 Thread Fittings\u003c\/li\u003e\n\u003cli\u003eSLI\/Crossfire Compliant\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eSpecifications\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eModel:N-GY2070GAMER-X\u003c\/li\u003e\n\u003cli\u003eBrand:Bykski\u003c\/li\u003e\n\u003cli\u003eMaterial:Electroplated High Purity Copper \/ Brushed Aluminum\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eCompatibility\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ci\u003e(Including but not limited to the following models)\u003c\/i\u003e\u003c\/li\u003e\n\u003cli\u003eGALAX GeForce RTX 2070 GAMER\u003c\/li\u003e\n\u003cli\u003eGALAX GeForce RTX 2070 8G\u003c\/li\u003e\n\u003cli\u003eGAINWARD RTX 2070 8G\u003c\/li\u003e\n\u003cli\u003e\u003ci\u003ecompatibility based on reference design only, block may not fit altered \/ super clocked and other third party variations that deviate from reference design.\u003c\/i\u003e\u003c\/li\u003e\n\u003cli\u003eFittings:G 1\/4 Thread\u003c\/li\u003e\n\u003cli\u003eStock Backplates:Due to mounting variances between cards, stock backplates not guaranteed to fit.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003e\u003cspan\u003eParts Included \u003c\/span\u003e\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003e1x Full Coverage GPU Water Block\u003c\/li\u003e\n\u003cli\u003e2x Stop Fitting\u003c\/li\u003e\n\u003cli\u003e1x Mounting Hardware\u003c\/li\u003e\n\u003cli\u003eThermal grease\u003c\/li\u003e\n\u003cli\u003e1x 5v Addressable RGB (RBW)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eWarnings\u003c\/h5\u003e\n\u003cp\u003e\u003cbr\u003eThis is a repair or replace only item. Returns not accepted on compatibility issues or block has had water\/fluid run through it.\u003c\/p\u003e\n\u003cp\u003eManufacturer reserves right to alter block design to expand compatibility. Delivered item may not 100% match pictured item.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003ePrimoChill is not responsible for any damage caused by or when using this product. Please use at your own risk.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"Bykski","offers":[{"title":"Default Title","offer_id":24995110944868,"sku":"N-GY2070GAMER-X","price":99.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0069\/8102\/5892\/files\/221b6c1d-7954-4dc9-bf91-416ca0a077d4.jpg?v=1781309687"},{"product_id":"bykski-zotac-rtx-2060-oc-hb-gtx-1660ti-oc-ha-full-coverage-gpu-water-block-clear-n-st2060hb-x","title":"Bykski Full Coverage GPU Water Block for Zotac RTX 2060 OC HB \/ GTX 1660Ti  OC HA - Clear (N-ST2060HB-X)","description":"\u003cp\u003eThe Bykski Zotac RTX 2060 OC HB \/ GTX 1660Ti  OC HA Full Coverage GPU Water Block is a work of art! This full coverage block, directly cools the video cards core (GPU), graphics memory (RAM) as well as the voltage regulator modules (VRM). By directly cooling these components you can achieve great temperatures! Along with these temperatures comes the ability to reach higher overclocks or extend the overall lifespan of your card by running at below factory temps.\u003c\/p\u003e\n\u003cp\u003eThe block is constructed of high purity copper that is electroplated to prevent oxidation. A high flow design is used to allow multiple blocks to run in series. Top and bottom ports can be used to configure parallel or serial designs in multi block set ups.\u003c\/p\u003e\n\u003ch5\u003eFeatures\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eFinest Craftsmanship\u003c\/li\u003e\n\u003cli\u003eDesigned to Fit Standard G1\/4 Thread Fittings\u003c\/li\u003e\n\u003cli\u003eSLI\/Crossfire Compliant\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eSpecifications\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eModel:N-ST2060HB-X\u003c\/li\u003e\n\u003cli\u003eBrand: Bykski\u003c\/li\u003e\n\u003cli\u003eMaterial:Electroplated High Purity Copper \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eCompatibility\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ci\u003e(Including but not limited to the following models)\u003c\/i\u003e\u003c\/li\u003e\n\u003cli\u003eZotac RTX 2060 6GD6 OC HB\u003c\/li\u003e\n\u003cli\u003eZotac GTX 1660Ti 6GD6 OC HA\u003c\/li\u003e\n\u003cli\u003e\u003ci\u003ecompatibility based on this design only, block may not fit altered \/ super clocked and other third party variations that deviate from this design.\u003c\/i\u003e\u003c\/li\u003e\n\u003cli\u003eFittings:G 1\/4 Thread\u003c\/li\u003e\n\u003cli\u003eStock Backplates:Due to mounting variances between cards, stock backplates not guaranteed to fit.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003e\u003cspan\u003eParts Included \u003c\/span\u003e\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003e1x Full Coverage GPU Water Block\u003c\/li\u003e\n\u003cli\u003e2x Stop Fitting\u003c\/li\u003e\n\u003cli\u003e1x Mounting Hardware\u003c\/li\u003e\n\u003cli\u003eThermal grease\u003c\/li\u003e\n\u003cli\u003e1x 5v Addressable RGB (RBW)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eWarnings\u003c\/h5\u003e\n\u003cp\u003e\u003cbr\u003eThis is a repair or replace only item. Returns not accepted on compatibility issues or block has had water\/fluid run through it.\u003c\/p\u003e\n\u003cp\u003eManufacturer reserves right to alter block design to expand compatibility. Delivered item may not 100% match pictured item.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003eNot responsible for any damage caused by or when using this product. Please use at your own risk.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"Bykski","offers":[{"title":"Default Title","offer_id":27283672727652,"sku":"N-ST2060HB-X","price":99.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0069\/8102\/5892\/files\/8f516bf5-fe27-4d64-afa4-290a37da7a52.jpg?v=1781309753"},{"product_id":"bykski-asus-rtx-2070-o8g-evo-full-coverage-gpu-water-block-clear-n-as2070dual-evo-x","title":"Bykski Full Coverage GPU Water Block For ASUS RTX 2070 O8G EVO - Clear (N-AS2070DUAL EVO-X)","description":"\u003cp\u003eThe Bykski ASUS RTX 2070 O8G EVO Full Coverage GPU Water Block is a work of art. This full coverage block, directly cools the video cards core (GPU), graphics memory (RAM) as well as the voltage regulator modules (VRM). By directly cooling these components you can achieve great temperatures! Along with these temperatures comes the ability to reach higher overclocks or extend the overall lifespan of your card by running at below factory temps.\u003c\/p\u003e\n\u003cp\u003eThe block is constructed of high purity copper that is electroplated to prevent oxidation. A high flow design is used to allow multiple blocks to run in series. Top and bottom ports can be used to configure parallel or serial designs in multi block set ups.\u003c\/p\u003e\n\u003ch5\u003eFeatures\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eFinest Craftsmanship\u003c\/li\u003e\n\u003cli\u003eDesigned to Fit Standard G1\/4 Thread Fittings\u003c\/li\u003e\n\u003cli\u003eSLI\/Crossfire Compliant\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eSpecifications\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eModel:N-AS2070DUAL EVO-X\u003c\/li\u003e\n\u003cli\u003eBrand:Bykski\u003c\/li\u003e\n\u003cli\u003eMaterial:Electroplated High Purity Copper \/ Clear Acrylic\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eCompatibility\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eCompatible graphics card type:\u003c\/li\u003e\n\u003cli\u003eASUS Dual RTX 2070 08G EVO\u003c\/li\u003e\n\u003cli\u003e\u003ci\u003ecompatibility based on this design only, block may not fit altered \/ super clocked and other third party variations that deviate from this design.\u003c\/i\u003e\u003c\/li\u003e\n\u003cli\u003eFittings:G 1\/4 Thread\u003c\/li\u003e\n\u003cli\u003eStock Backplates: Due to mounting variances between cards, stock backplates not guaranteed to fit.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003e\u003cspan\u003eParts Included \u003c\/span\u003e\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003e1x Full Coverage GPU Water Block\u003c\/li\u003e\n\u003cli\u003e2x Stop Fitting\u003c\/li\u003e\n\u003cli\u003e1x Mounting Hardware\u003c\/li\u003e\n\u003cli\u003eThermal grease\u003c\/li\u003e\n\u003cli\u003e1x RBW LED\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eWarnings\u003c\/h5\u003e\n\u003cp\u003e\u003cbr\u003eThis is a repair or replace only item. Returns not accepted on compatibility issues or block has had water\/fluid run through it.\u003c\/p\u003e\n\u003cp\u003eManufacturer reserves right to alter block design to expand compatibility. Delivered item may not 100% match pictured item.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e Not responsible for any damage caused by or when using this product. Please use at your own risk.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"Bykski","offers":[{"title":"Default Title","offer_id":30973998792802,"sku":"N-AS2070DUAL EVO-X","price":99.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0069\/8102\/5892\/files\/2eeb5c01-971c-4396-bf21-c01e7c69931d.jpg?v=1781309926"},{"product_id":"bykski-full-coverage-gpu-water-block-for-sapphire-rx-5700-xt-nitro-clear-w-rbw-a-sp5700xtplat-x","title":"Bykski Full Coverage GPU Water Block for Sapphire RX 5700 XT Nitro+ - Clear W\/ RBW (A-SP5700XTPLAT-X)","description":"\u003cp\u003eThe Bykski Full Coverage GPU Water Block for Sapphire RX 5700 XT Nitro+ is a work of art! This full coverage block, directly cools the video cards core (GPU), graphics memory (RAM) as well as the voltage regulator modules (VRM). By directly cooling these components you can achieve great temperatures! Along with these temperatures comes the ability to reach higher overclocks or extend the overall lifespan of your card by running at below factory temps.\u003c\/p\u003e\n\u003cp\u003eThe block is constructed of high purity copper that is electroplated to prevent oxidation. A high flow design is used to allow multiple blocks to run in series. Top and bottom ports can be used to configure parallel or serial designs in multi block set ups.\u003c\/p\u003e\n\u003ch5\u003eFeatures\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eFinest Craftsmanship\u003c\/li\u003e\n\u003cli\u003eDesigned to Fit Standard G1\/4 Thread Fittings\u003c\/li\u003e\n\u003cli\u003eSLI\/Crossfire Compliant\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eSpecifications\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eModel:A-SP5700XTPLAT-X\u003c\/li\u003e\n\u003cli\u003eBrand:Bykski\u003c\/li\u003e\n\u003cli\u003eMaterial:Electroplated High Purity Copper \/ Clear Acrylic\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eCompatibility\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eLoop:Non-Aluminum\u003c\/li\u003e\n\u003cli\u003e\u003ci\u003e(Including but not limited to the following models)\u003c\/i\u003e\u003c\/li\u003e\n\u003cli\u003eSapphire RX 5700 XT Nitro+\u003c\/li\u003e\n\u003cli\u003ePlease check if your PCB is consistent with picture, to ensure compatibility\u003c\/li\u003e\n\u003cli\u003e\u003ci\u003ecompatibility based on this design only, block may not fit altered \/ super clocked and other third party variations that deviate from this design.\u003c\/i\u003e\u003c\/li\u003e\n\u003cli\u003eFittings:G 1\/4 Thread\u003c\/li\u003e\n\u003cli\u003eStock Backplates: Due to mounting variances between cards, stock backplates not guaranteed to fit.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003e\u003cspan\u003eParts Included \u003c\/span\u003e\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003e1x Full Coverage GPU Water Block\u003c\/li\u003e\n\u003cli\u003e2x Stop Fitting\u003c\/li\u003e\n\u003cli\u003e1x Mounting Hardware\u003c\/li\u003e\n\u003cli\u003eThermal grease\u003c\/li\u003e\n\u003cli\u003e1x 5v Addressable RGB (RBW)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eWarnings\u003c\/h5\u003e\n\u003cp\u003e\u003cbr\u003eThis is a repair or replace only item. Returns not accepted on compatibility issues or block has had water\/fluid run through it.\u003c\/p\u003e\n\u003cp\u003eManufacturer reserves right to alter block design to expand compatibility. Delivered item may not 100% match pictured item. Product does NOT come with English instructions.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003eNot responsible for any damage caused by or when using this product. Please use at your own risk.\u003c\/p\u003e","brand":"Bykski","offers":[{"title":"Default Title","offer_id":31829729869922,"sku":"A-SP5700XTPLAT-X","price":233.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0069\/8102\/5892\/files\/8b45cdde-5f43-4f85-a6e9-dce95764b8d8.jpg?v=1781310584"},{"product_id":"bykski-full-coverage-gpu-water-block-for-zotac-rtx-3080-10g-6x-oc-n-st3090tq-x","title":"Bykski Full Coverage GPU Water Block for Zotac RTX 3080-10G6X Apocalypse OC (N-ST3090TQ-X)","description":"\u003cp\u003eThe Bykski Full Coverage GPU Water Block for Zotac RTX 3080-10G6X Apocalypse OC is a work of art! This full coverage block directly cools the video cards core (GPU), graphics memory (RAM) as well as the voltage regulator modules (VRM). By directly cooling these components you can achieve great temperatures! Along with these temperatures comes the ability to reach higher overclocks or extend the overall lifespan of your card by running at below factory temps.\u003c\/p\u003e\n\u003cp\u003eThe block is constructed of high purity copper that is electroplated to prevent oxidation. A high flow design is used to allow multiple blocks to run in series. Top and bottom ports can be used to configure parallel or serial designs in multi block set ups.\u003c\/p\u003e\n\u003ch5\u003eFeatures\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eFinest Craftsmanship\u003c\/li\u003e\n\u003cli\u003eDesigned to Fit Standard G 1\/4in. Thread Fittings\u003c\/li\u003e\n\u003cli\u003eSLI\/Crossfire Compliant\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eSpecifications\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eModel: N-ST3090TQ-X\u003c\/li\u003e\n\u003cli\u003eBrand: Bykski\u003c\/li\u003e\n\u003cli\u003eBlock Material:Electroplated High Purity Copper \/ PMMA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eCompatibility\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ci\u003e(Including but not limited to the following models)\u003c\/i\u003e\u003c\/li\u003e\n\u003cli\u003eZotac RTX 3080-10G6X Apocalypse OC\u003c\/li\u003e\n\u003cli\u003ePlease check over the entire PCB picture after narrowing your selection to ensure compatibility. If you have any questions, please contact support for confirmation.\u003c\/li\u003e\n\u003cli\u003e\u003ci\u003eCompatibility based on these circuit board designs only\u003c\/i\u003e\u003c\/li\u003e\n\u003cli\u003eFittings: G 1\/4in. Thread\u003c\/li\u003e\n\u003cli\u003eStock Backplates: Due to mounting variances between cards, stock backplates not guaranteed to fit.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003e\u003cspan\u003eParts Included \u003c\/span\u003e\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003e1x Full Coverage GPU Water Block\u003c\/li\u003e\n\u003cli\u003e2x Stop Fitting\u003c\/li\u003e\n\u003cli\u003e1x Mounting Hardware\u003c\/li\u003e\n\u003cli\u003eThermal grease\u003c\/li\u003e\n\u003cli\u003e1x 5v A-RGB (RBW) Light\u003c\/li\u003e\n\u003cli\u003e(Warning: Addressable RGB (RBW) is 5V and is ONLY compatible with Addressable RGB (RBW) components. RGB is 12V and is ONLY compatible with RGB components. Mix and match will NOT work and will cause damage.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eWarnings\u003c\/h5\u003e\n\u003cp\u003eThis is a repair or replace only item. Returns not accepted on compatibility issues or block has had water\/fluid run through it.\u003c\/p\u003e\n\u003cp\u003eManufacturer reserves right to alter block design to expand compatibility. Delivered item may not 100% match pictured item. Product does NOT come with English instructions.\u003c\/p\u003e\n\u003cp\u003eNot responsible for any damage caused by or when using this product. Please use at your own risk.\u003c\/p\u003e","brand":"Bykski","offers":[{"title":"Default Title","offer_id":32030150656098,"sku":"N-ST3090TQ-X","price":169.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0069\/8102\/5892\/files\/ce1a8c13-029a-4912-bba2-b98cdb2bb939.jpg?v=1781311305"},{"product_id":"bykski-full-coverage-gpu-water-block-and-backplate-for-aic-founders-edition-rtx-3080-3090-version-2-black-pom-n-rtx3090h-x-v2","title":"Bykski Full Coverage GPU Water Block and Backplate For NVIDIA GeForce RTX 3080\/3090 Reference Design - Black POM (N-RTX3090H-X-V2)","description":"\u003cp\u003eThe \u003cspan\u003eN-RTX3090H-X-V2\u003c\/span\u003e full-coverage GPU water block directly cools your video card's core (GPU), graphics memory (RAM), and voltage regulator modules (VRM). By targeting these critical components, you'll achieve dramatically lower temperatures, unlock higher overclocks, and extend the lifespan of your card.\u003c\/p\u003e\n\u003cp\u003eThis Black POM version features a solid black Polyoxymethylene (POM) top in place of the standard acrylic, delivering a clean, blacked-out aesthetic that pairs perfectly with dark or stealth builds.\u003c\/p\u003e\n\u003cp\u003eA high-flow design allows multiple blocks to run in series. The block supports both parallel and serial configurations. In multi-block setups, an additional bridge may be needed depending on your loop design.\u003c\/p\u003e\n\u003ch5\u003eSpecifications\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eBlock Material: Nickel Electroplated High Purity Copper \/ POM (Black)\u003c\/li\u003e\n\u003cli\u003eBackplate Material: Black Anodized Aluminum (not in contact with coolant)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eCompatibility\u003c\/h5\u003e\n\u003cp\u003eONLY Compatible with\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eGALAX GEFORCE RTX 3080 SG (1-CLICK OC) 10GB\u003c\/li\u003e\n\u003cli\u003eGALAX GEFORCE RTX 3080 EX GAMER (1-CLICK OC) 10GB\u003c\/li\u003e\n\u003cli\u003eGALAX GEFORCE RTX 3090 SG (1-CLICK OC) 24GB\u003c\/li\u003e\n\u003cli\u003eGALAX GEFORCE RTX 3090 EX GAMER (1-CLICK OC) 24GB\u003c\/li\u003e\n\u003cli\u003eGALAX GEFORCE RTX 3080 Ti SG (1-CLICK OC) 12GB\u003c\/li\u003e\n\u003cli\u003eLEADTEK WINFAST RTX 3080 HURRICANE 10GB\u003c\/li\u003e\n\u003cli\u003eLEADTEK WINFAST RTX 3080 Ti HURRICANE 12GB\u003c\/li\u003e\n\u003cli\u003eMANLI GEFORCE RTX 3090 GALLARDO\u003c\/li\u003e\n\u003cli\u003eMANLI GEFORCE RTX 3080 GALLARDO\u003c\/li\u003e\n\u003cli\u003eMANLI GEFORCE RTX 3080 Ti GALLARDO\u003c\/li\u003e\n\u003cli\u003ePNY GEFORCE RTX 3080 Ti 12GB XLR8 GAMING REVEL EPIC-X RGB TRIPLE FAN \u003c\/li\u003e\n\u003cli\u003ePNY GEFORCE RTX 3080 10GB XLR8 GAMING UPRISING EPIC-X RGB TRIPLE FAN\u003c\/li\u003e\n\u003cli\u003ePNY GEFORCE RTX 3090 24GB XLR8 GAMING REVEL EPIC-X RGB TRIPLE FAN\u003c\/li\u003e\n\u003cli\u003ePALIT GEFORCE RTX 3080 GAMINGPRO OC\u003c\/li\u003e\n\u003cli\u003ePALIT GEFORCE RTX 3080 GAMINGPRO\u003c\/li\u003e\n\u003cli\u003ePALIT GEFORCE RTX 3090 GAMINGPRO OC\u003c\/li\u003e\n\u003cli\u003ePALIT GEFORCE RTX 3090 GAMINGPRO\u003c\/li\u003e\n\u003cli\u003ePALIT GEFORCE RTX 3080 Ti GAMINGPRO\u003c\/li\u003e\n\u003cli\u003eKFA2 GEFORCE RTX 3080 Ti SG (1-CLICK OC)\u003c\/li\u003e\n\u003cli\u003eKFA2 GEFORCE RTX 3080 SG (1-CLICK OC) \u003c\/li\u003e\n\u003cli\u003eKFA2 GEFORCE RTX 3090 SG (1-CLICK OC)\u003c\/li\u003e\n\u003cli\u003eGAINWARD GEFORCE RTX 3090 PHOENIX GOLDEN SAMPLE\u003c\/li\u003e\n\u003cli\u003eGAINWARD GEFORCE RTX 3090 PHOENIX\u003c\/li\u003e\n\u003cli\u003eGAINWARD GEFORCE RTX 3080 Ti PHOENIX GOLDEN SAMPLE\u003c\/li\u003e\n\u003cli\u003eGAINWARD GEFORCE RTX 3080 Ti PHOENIX\u003c\/li\u003e\n\u003cli\u003eGAINWARD GEFORCE RTX 3080 PHOENIX GOLDEN SAMPLE\u003c\/li\u003e\n\u003cli\u003eGAINWARD GEFORCE RTX 3080 PHOENIX\u003c\/li\u003e\n\u003cli\u003eMAXSUN GEFORCE RTX 3080 iCRAFT OC 10GB\u003c\/li\u003e\n\u003cli\u003eEMTEK GEFORCE RTX 3090 BLACK OC 24GB\u003c\/li\u003e\n\u003cli\u003eEMTEK GEFORCE RTX 3080 Ti BLACK D6X 12GB\u003c\/li\u003e\n\u003cli\u003eDELL OEM GEFORCE RTX 3080 10GB\u003c\/li\u003e\n\u003cli\u003eDELL OEM GEFORCE RTX 3090 24GB\u003c\/li\u003e\n\u003cli\u003eASUS EKWB GEFORCE RTX 3090 24GB\u003c\/li\u003e\n\u003cli\u003eYESTON GEFORCE RTX 3080 10GD6X YA\u003c\/li\u003e\n\u003cli\u003eHP OEM GEFORCE RTX 3080 10GB\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eParts Included\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eGPU Water Cooling Block\u003c\/li\u003e\n\u003cli\u003eInstallation Hardware, including thermal paste\u003c\/li\u003e\n\u003cli\u003eNote: This Black POM version does NOT include addressable RGB lighting.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eWarnings\u003c\/h5\u003e\n\u003cp\u003eThis is a repair or replacement-only item. Returns are not accepted on compatibility issues or if the block has had water\/fluid run through it.\u003c\/p\u003e\n\u003cp\u003eThe product does NOT include printed instructions. Please check the product gallery images for the installation illustration. The manufacturer reserves the right to alter the block design to expand compatibility. The delivered item may not 100% match the pictured item.\u003cbr\u003e\u003cbr\u003eGenerally, thermal pads should be installed on the card where the block has corresponding raised contact points, except the GPU core, which uses thermal paste. Installing pads on other components can lead to improper contact and poor performance.\u003c\/p\u003e\n\u003cp\u003eThis product is designed for self-installation. The manufacturer is not liable for any damages resulting from misuse, including, but not limited to, improper installation or the use of incompatible hardware or fluids. By using this product, you accept all related risks.\u003c\/p\u003e","brand":"Bykski","offers":[{"title":"Default Title","offer_id":32030150688866,"sku":"N-RTX3090H-X-V2-BK","price":233.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0069\/8102\/5892\/files\/N-RTX3090H-X-V2-BK.jpg?v=1785508994"},{"product_id":"bykski-triple-gpu-40mm-sli-cf-connection-bridge-module-version-3-frosted-l4-3way","title":"Bykski Triple GPU 40mm SLI\/CF Connection Bridge Module Version 3 - Frosted (L4-3WAY)","description":"\u003cp\u003eThe Bykski Triple GPU 40mm SLI\/CF Connection Bridge Block allows you to connect three adjacent GPU blocks (40mm apart) creating a singular block. This increases rigidity and stability of your GPUs as well as eliminating the need for fittings or tubing between blocks.\u003c\/p\u003e\n\u003ch5\u003eFeatures\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003ePMMA\u003c\/li\u003e\n\u003cli\u003eDesigned to Fit Standard G 1\/4in. Thread Fittings\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eSpecifications\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eModel: B-L4-3WAY-X-V3\u003c\/li\u003e\n\u003cli\u003eBrand: Bykski\u003c\/li\u003e\n\u003cli\u003eMaterial: PMMA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eCompatibility\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eGPU Blocks: 3 (Bykski Brand)\u003c\/li\u003e\n\u003cli\u003ePCI-E Slot Spacing: 40mm (Check Picture Gallery Above)\u003c\/li\u003e\n\u003cli\u003eBykski GPU Blocks\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003e\u003cspan\u003eParts Included \u003c\/span\u003e\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003e1x Bykski Triple GPU 40mm SLI\/CF Connection Bridge Block\u003c\/li\u003e\n\u003cli\u003eStop fittings NOT included\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eWarnings\u003c\/h5\u003e\n\u003cb\u003eBridge block has 4 ports, only 2 are required for usage so stop fittings may be required based on configuration, please plan accordingly.\u003c\/b\u003e\n\u003cp\u003e\u003cbr\u003e Not responsible for any damage caused by or when using this product. Please use at your own risk.\u003c\/p\u003e","brand":"Bykski","offers":[{"title":"Default Title","offer_id":32043253432418,"sku":"B-L4-3WAY-X-V3","price":35.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0069\/8102\/5892\/files\/a6a6946a-5914-46b0-80ed-34c54848efe4.jpg?v=1781311696"},{"product_id":"bykski-full-coverage-gpu-water-block-and-backplate-for-nvidia-founders-edition-rtx-3090-n-rtx3090fe-x-v2","title":"Bykski Full Coverage GPU Water Block and Backplate for nVidia Founders Edition RTX 3090 (N-RTX3090FE-X-V2)","description":"\u003cp\u003eThis \u003cspan\u003eN-RTX3090FE-X-V2 \u003c\/span\u003efull-coverage block directly cools the video card core (GPU), graphics memory (RAM), and voltage regulator modules (VRM). By directly cooling these components, you can achieve great temperatures and reach higher overclocks while extending the overall lifespan of your card by running at lower temperatures.\u003c\/p\u003e\n\u003cp\u003eA high-flow design allows multiple blocks to run in series. The block can be configured as parallel or serial designs. In multi-block setups, an additional bridge may be needed, depending on your setup.\u003c\/p\u003e\n\u003ch5\u003eSpecifications\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eBlock Material: Nickel Electroplated High Purity Copper \/ PMMA (Acrylic)\u003c\/li\u003e\n\u003cli\u003eBackplate Material: Black Anodized Aluminum (not in contact with coolant)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eCompatibility\u003c\/h5\u003e\n\u003cp\u003eONLY Compatible with\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003eNVIDIA GEFORCE RTX 3090 FOUNDERS EDITION 24GB\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eParts Included\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eGPU Water Cooling Block\u003c\/li\u003e\n\u003cli\u003eInstallation Hardware, including thermal paste\u003c\/li\u003e\n\u003cli\u003e5v Addressable RGB (RBW)\u003c\/li\u003e\n\u003cli\u003e(Warning: Addressable RGB (RBW) is 5V and is ONLY compatible with Addressable RGB (RBW) components. RGB is 12V and is ONLY compatible with RGB components. Mix and match will NOT work and will cause damage.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eWarnings\u003c\/h5\u003e\n\u003cp\u003eThis is a repair or replacement-only item. Returns are not accepted on compatibility issues or if the block has had water\/fluid run through it.\u003c\/p\u003e\n\u003cp\u003eThe product does NOT include printed instructions. Please check the product gallery images for the installation illustration. The manufacturer reserves the right to alter the block design to expand compatibility. The delivered item may not 100% match the pictured item.\u003cbr\u003e\u003cbr\u003eGenerally, thermal pads should be installed on the card where the block has corresponding raised contact points, except the GPU core, which uses thermal paste. Installing pads on other components can lead to improper contact and poor performance.\u003c\/p\u003e\n\u003cp\u003eThis product is designed for self-installation. The manufacturer is not liable for any damages resulting from misuse, including, but not limited to, improper installation or the use of incompatible hardware or fluids. By using this product, you accept all related risks.\u003c\/p\u003e","brand":"Bykski","offers":[{"title":"Clear","offer_id":32043253727330,"sku":"N-RTX3090FE-X-V2-CL","price":233.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0069\/8102\/5892\/files\/284a91dd-2044-4714-baa9-ce4a9a1a4bab.jpg?v=1781373038"},{"product_id":"bykski-full-coverage-gpu-water-block-and-backplate-for-palit-rtx-3070-gaming-pro-oc-n-pt3070pro-x","title":"Bykski Full Coverage GPU Water Block and Backplate for Palit RTX 3070 Gaming Pro OC (N-PT3070PRO-X)","description":"\u003cp\u003eThis full coverage block directly cools the video cards core (GPU), graphics memory (RAM), and voltage regulator modules (VRM). By directly cooling these components you can achieve great temperatures along with the ability to reach higher overclocks or extend the overall lifespan of your card by running at below factory temps.\u003c\/p\u003e\n\u003cp\u003eThe block is constructed of high purity copper that is electroplated to prevent oxidation. A high flow design is used to allow multiple blocks to run in series. Top and bottom ports can be used to configure parallel or serial designs in multi block set ups.\u003c\/p\u003e\n\u003ch5\u003eSpecifications\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eBlock Material: Electroplated High Purity Copper \/ Clear Acrylic\u003c\/li\u003e\n\u003cli\u003eBackplate Material: Black Anodized Aluminum (not in contact with coolant)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eCompatibility\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ci\u003e(Including but not limited to the following models)\u003c\/i\u003e\u003c\/li\u003e\n\u003cli\u003ePalit GeForce RTX 3070 Gaming Pro OC\u003c\/li\u003e\n\u003cli\u003eLeadtek RTX 3070 Life ES 8G\u003c\/li\u003e\n\u003cli\u003eYeston GeForce RTX 3070 8G\u003c\/li\u003e\n\u003cli\u003ePalit GeForce RTX 3060Ti Gaming Pro\u003c\/li\u003e\n\u003cli\u003ePlease check over the entire PCB picture after narrowing your selection to ensure compatibility. If you have any questions, please contact support for confirmation.\u003c\/li\u003e\n\u003cli\u003e\u003ci\u003eCompatibility based on these circuit board designs only\u003c\/i\u003e\u003c\/li\u003e\n\u003cli\u003eFittings: G 1\/4in. Thread\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eParts Included\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003e1x Full Coverage GPU Water Block\u003c\/li\u003e\n\u003cli\u003e1x Backplate\u003c\/li\u003e\n\u003cli\u003e2x Stop Fitting\u003c\/li\u003e\n\u003cli\u003e1x Mounting Hardware\u003c\/li\u003e\n\u003cli\u003eThermal grease\u003c\/li\u003e\n\u003cli\u003e1x 5v A-RGB (RBW) Light\u003c\/li\u003e\n\u003cli\u003e(Warning: Addressable RGB (RBW) is 5V and is ONLY compatible with Addressable RGB (RBW) components. RGB is 12V and is ONLY compatible with RGB components. Mix and match will NOT work and will cause damage.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eWarnings\u003c\/h5\u003e\n\u003cp\u003eThis is a repair or replace only item. Returns not accepted on compatibility issues or if block has had water\/fluid run through it.\u003c\/p\u003e\n\u003cp\u003eManufacturer reserves right to alter block design to expand compatibility. Delivered item may not 100% match pictured item. Product does NOT come with English instructions. Please see product gallery images for install guide if available. Generally, thermal pads should be installed on the card where the block has corresponding raised contact points with the exception of the GPU core, which uses thermal paste. Installing pads on other components can lead to improper contact and poor performance.\u003c\/p\u003e\n\u003cp\u003eNot responsible for any damage caused by or when using this product. Please use at your own risk.\u003c\/p\u003e","brand":"Bykski","offers":[{"title":"Default Title","offer_id":39394783101026,"sku":"N-PT3070PRO-X","price":233.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0069\/8102\/5892\/files\/764a1f5f-d749-449e-a4d4-7d9d94c856ca.jpg?v=1781314392"},{"product_id":"bykski-full-coverage-gpu-water-block-and-backplate-for-evga-rtx-3060ti-xc-n-ev3060xc-x-v2","title":"Bykski Full Coverage GPU Water Block and Backplate for EVGA RTX 3060Ti XC (N-EV3060XC-X-V2)","description":"\u003cp\u003eThis full coverage block directly cools the video cards core (GPU), graphics memory (RAM), and voltage regulator modules (VRM). By directly cooling these components you can achieve great temperatures along with the ability to reach higher overclocks or extend the overall lifespan of your card by running at below factory temps.\u003c\/p\u003e\n\u003cp\u003eThe block is constructed of high purity copper that is nickel electroplated to prevent oxidation. A high flow design is used to allow multiple blocks to run in series. Top and bottom ports can be used to configure parallel or serial designs in multi block set ups.\u003c\/p\u003e\n\u003ch5\u003eSpecifications\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eBlock Material: Nickel Electroplated High Purity Copper \/ Clear Acrylic\u003c\/li\u003e\n\u003cli\u003eBackplate Material: Black Anodized Aluminum (not in contact with coolant)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eCompatibility\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ci\u003e(Including but not limited to the following models)\u003c\/i\u003e\u003c\/li\u003e\n\u003cli\u003eEVGA RTX 3060 Ti XC\u003c\/li\u003e\n\u003cli\u003ePlease check over the entire PCB picture after narrowing your selection to ensure compatibility. If you have any questions, please contact support for confirmation.\u003c\/li\u003e\n\u003cli\u003e\u003ci\u003eCompatibility based on these circuit board designs only\u003c\/i\u003e\u003c\/li\u003e\n\u003cli\u003eFittings: G 1\/4in. Thread\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eParts Included\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003e1x Full Coverage GPU Water Block\u003c\/li\u003e\n\u003cli\u003e1x Backplate\u003c\/li\u003e\n\u003cli\u003e2x Stop Fitting\u003c\/li\u003e\n\u003cli\u003e1x Mounting Hardware\u003c\/li\u003e\n\u003cli\u003eThermal grease\u003c\/li\u003e\n\u003cli\u003e1x 5v A-RGB (RBW) Light\u003c\/li\u003e\n\u003cli\u003e(Warning: Addressable RGB (RBW) is 5V and is ONLY compatible with Addressable RGB (RBW) components. RGB is 12V and is ONLY compatible with RGB components. Mix and match will NOT work and will cause damage.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eWarnings\u003c\/h5\u003e\n\u003cp\u003eThis is a repair or replace only item. Returns are not accepted on compatibility issues or if block has had water\/fluid run through it.\u003c\/p\u003e\n\u003cp\u003eManufacturer reserves right to alter block design to expand compatibility. Delivered item may not 100% match pictured item. Product does NOT come with English instructions. Please see product gallery images for install guide if available. Generally, thermal pads should be installed on the card where the block has corresponding raised contact points with the exception of the GPU core, which uses thermal paste. Installing pads on other components can lead to improper contact and poor performance.\u003c\/p\u003e\n\u003cp\u003eNot responsible for any damage caused by or when using this product. Please use at your own risk.\u003c\/p\u003e","brand":"Bykski","offers":[{"title":"Default Title","offer_id":39806757666914,"sku":"N-EV3060XC-X-V2","price":233.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0069\/8102\/5892\/files\/991b361b-5043-45c4-84f1-37e0088747ec.jpg?v=1781315630"},{"product_id":"bykski-full-coverage-gpu-water-block-and-backplate-for-colorful-igame-n3090-2406x-s12-n-ig3090si2","title":"Bykski Full Coverage GPU Water Block and Backplate for Colorful iGame N3090-2406X-S12 (N-IG3090SI2-X)","description":"\u003cp\u003eThis full coverage block directly cools the video cards core (GPU), graphics memory (RAM), and voltage regulator modules (VRM). By directly cooling these components you can achieve great temperatures along with the ability to reach higher overclocks or extend the overall lifespan of your card by running at below factory temps.\u003c\/p\u003e\n\u003cp\u003eThe block is constructed of high purity copper that is nickel electroplated to prevent oxidation. A high flow design is used to allow multiple blocks to run in series. Top and bottom ports can be used to configure parallel or serial designs in multi block set ups.\u003c\/p\u003e\n\u003ch5\u003eSpecifications\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eBlock Material: Nickel Electroplated High Purity Copper \/ Acrylic\u003c\/li\u003e\n\u003cli\u003eBackplate Material: Black Anodized Aluminum (not in contact with coolant)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eCompatibility\u003c\/h5\u003e\n\u003cp\u003eOnly Compatible with\"\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eColorful iGame N3090-2406X-S12\u003c\/li\u003e\n\u003cli\u003ePlease check over the entire PCB picture after narrowing your selection to ensure compatibility. If you have any questions, please contact support for confirmation.\u003c\/li\u003e\n\u003cli\u003e\u003ci\u003eCompatibility based on these circuit board designs only\u003c\/i\u003e\u003c\/li\u003e\n\u003cli\u003eFittings: G 1\/4in. Thread\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eParts Included\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003e1x Full Coverage GPU Water Block\u003c\/li\u003e\n\u003cli\u003e1x Backplate\u003c\/li\u003e\n\u003cli\u003e2x Stop Fitting\u003c\/li\u003e\n\u003cli\u003e1x Mounting Hardware\u003c\/li\u003e\n\u003cli\u003eThermal grease\u003c\/li\u003e\n\u003cli\u003e1x 5v A-RGB (RBW) Light\u003c\/li\u003e\n\u003cli\u003e(Warning: Addressable RGB (RBW) is 5V and is ONLY compatible with Addressable RGB (RBW) components. RGB is 12V and is ONLY compatible with RGB components. Mix and match will NOT work and will cause damage.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eWarnings\u003c\/h5\u003e\n\u003cp\u003eThis is a repair or replace only item. Returns are not accepted on compatibility issues or if block has had water\/fluid run through it.\u003c\/p\u003e\n\u003cp\u003eManufacturer reserves right to alter block design to expand compatibility. Delivered item may not 100% match pictured item. Product does NOT come with English instructions. Please see product gallery images for install guide if available. Generally, thermal pads should be installed on the card where the block has corresponding raised contact points with the exception of the GPU core, which uses thermal paste. Installing pads on other components can lead to improper contact and poor performance.\u003c\/p\u003e\n\u003cp\u003eNot responsible for any damage caused by or when using this product. Please use at your own risk.\u003c\/p\u003e","brand":"Bykski","offers":[{"title":"Default Title","offer_id":39993928974434,"sku":"N-IG3090SI2-X","price":233.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0069\/8102\/5892\/files\/74dc7867-99ae-4642-b2df-c6a481a67c2b.jpg?v=1741805469"},{"product_id":"bykski-full-coverage-gpu-water-block-w-integrated-active-backplate-for-evga-rtx-3080-3090-ftw3-ultra-gaming-n-ev3090ftw3-tc-v2","title":"Bykski Full Coverage GPU Water Block w\/ Integrated Active Backplate for EVGA RTX 3080\/3090 FTW3 Ultra Gaming (N-EV3090FTW3-TC-V2)","description":"\u003cp\u003eThis N-EV3090FTW3-TC-V2 full-coverage block directly cools the video card core (GPU), graphics memory (RAM), and voltage regulator modules (VRM). By directly cooling these components, you can achieve great temperatures and reach higher overclocks while extending the overall lifespan of your card by running at lower temperatures.\u003c\/p\u003e\n\u003cp\u003eA high-flow design allows multiple blocks to run in series. The block can be configured as parallel or serial designs. In multi-block setups, an additional bridge may be needed, depending on your setup.\u003c\/p\u003e\n\u003ch5\u003eSpecifications\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eBlock Material: Nickel Electroplated High Purity Copper \/ PMMA (Acrylic)\u003c\/li\u003e\n\u003cli\u003eBackplate Material: Nickel Plated Copper with Acrylic Cover\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eCompatibility\u003c\/h5\u003e\n\u003cp\u003eONLY Compatible with\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eEVGA GEFORCE RTX 3090 FTW3 ULTRA GAMING 24GB\u003c\/li\u003e\n\u003cli\u003eEVGA GEFORCE RTX 3080 Ti FTW3 ULTRA GAMING 12GB\u003c\/li\u003e\n\u003cli\u003eEVGA GEFORCE RTX 3080 FTW3 ULTRA GAMING 12GB \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eParts Included\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eGPU Water Cooling Block\u003c\/li\u003e\n\u003cli\u003eInstallation Hardware, including thermal paste\u003c\/li\u003e\n\u003cli\u003e5v Addressable RGB (RBW)\u003c\/li\u003e\n\u003cli\u003e(Warning: Addressable RGB (RBW) is 5V and is ONLY compatible with Addressable RGB (RBW) components. RGB is 12V and is ONLY compatible with RGB components. Mix and match will NOT work and will cause damage.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eWarnings\u003c\/h5\u003e\n\u003cp\u003eThis is a repair or replacement-only item. Returns are not accepted on compatibility issues or if the block has had water\/fluid run through it.\u003c\/p\u003e\n\u003cp\u003eThe product does NOT include printed instructions. Please check the product gallery images for the installation illustration. The manufacturer reserves the right to alter the block design to expand compatibility. The delivered item may not 100% match the pictured item.\u003cbr\u003e\u003cbr\u003eGenerally, thermal pads should be installed on the card where the block has corresponding raised contact points, except the GPU core, which uses thermal paste. Installing pads on other components can lead to improper contact and poor performance.\u003c\/p\u003e\n\u003cp\u003eThis product is designed for self-installation. The manufacturer is not liable for any damages resulting from misuse, including, but not limited to, improper installation or the use of incompatible hardware or fluids. By using this product, you accept all related risks.\u003c\/p\u003e","brand":"Bykski","offers":[{"title":"Default Title","offer_id":40130354151522,"sku":"N-EV3090FTW3-TC-V2","price":359.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0069\/8102\/5892\/files\/N-EV3090FTW3-TC-V2_1.jpg?v=1781555128"},{"product_id":"bykski-full-coverage-gpu-water-block-w-integrated-active-backplate-for-evga-rtx-3090-kingpin-n-ev3090kp-tc","title":"Bykski Full Coverage GPU Water Block w\/ Integrated Active Backplate for EVGA RTX 3090 Kingpin (N-EV3090KP-TC)","description":"\u003cp\u003eThis full coverage block directly cools the video cards core (GPU), graphics memory (RAM), and voltage regulator modules (VRM) on both sides of GPUs. By directly cooling these components you can achieve great temperatures along with the ability to reach higher overclocks or extend the overall lifespan of your card by running at below factory temps.\u003c\/p\u003e\u003cp\u003eThe block and active backplate are constructed of high-purity copper that is electroplated to prevent oxidation. A high-flow design is used to allow multiple blocks to run in series. Access to top and bottom G1\/4 ports is required on the bridge block.\u003c\/p\u003e\u003ch5\u003eSpecifications\u003c\/h5\u003e\u003cul\u003e\n\u003cli\u003eBlock Material: Electroplated High Purity Copper \/ Acrylic\u003c\/li\u003e\n\u003cli\u003eActive Backplate Material: Electroplated High Purity Copper \/Acrylic\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch5\u003eCompatibility\u003c\/h5\u003e\u003cul\u003e\n\u003cli\u003e\u003cem\u003e(Including but not limited to the following models)\u003c\/em\u003e\u003c\/li\u003e\n\u003cli\u003eEVGA GeForce RTX 3090 Kingpin\u003c\/li\u003e\n\u003cli\u003eEVGA GeForce RTX 3090 Kingpin Hybrid\u003c\/li\u003e\n\u003cli\u003ePlease check over the entire PCB picture after narrowing your selection to ensure compatibility. If you have any questions, please contact support for confirmation.\u003c\/li\u003e\n\u003cli\u003e\u003cem\u003eCompatibility based on these circuit board designs only\u003c\/em\u003e\u003c\/li\u003e\n\u003cli\u003eFittings: G 1\/4in. Thread\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch5\u003eParts Included\u003c\/h5\u003e\u003cul\u003e\n\u003cli\u003e1x Full Coverage GPU Water Block\u003c\/li\u003e\n\u003cli\u003e1x Active Backplate Block\u003c\/li\u003e\n\u003cli\u003e2x Stop Fitting\u003c\/li\u003e\n\u003cli\u003e1x Mounting Hardware\u003c\/li\u003e\n\u003cli\u003eThermal grease\u003c\/li\u003e\n\u003cli\u003e1x 5v A-RGB (RBW) Light\u003c\/li\u003e\n\u003cli\u003e(Warning: Addressable RGB (RBW) is 5V and is ONLY compatible with Addressable RGB (RBW) components. RGB is 12V and is ONLY compatible with RGB components. Mix and match will NOT work and will cause damage.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch5\u003eWarnings\u003c\/h5\u003e\u003cp\u003eThis is a repair or replacement-only item. Returns are not accepted on compatibility issues or if the block has had water\/fluid run through it.\u003c\/p\u003e\u003cp\u003eThe manufacturer reserves the right to alter the block design to expand compatibility. Delivered items may not 100% match the pictured item. The product does NOT come with English instructions. Please see the product gallery images for the install guide if available. Generally, thermal pads should be installed on the card where the block has corresponding raised contact points except the GPU core, which uses thermal paste. For -TC SKU blocks with active backplates, the VRAM on the back of the card should be padded. Installing pads on other components can lead to improper contact and poor performance.\u003c\/p\u003e\u003cp\u003eNot responsible for any damage caused by or when using this product. Please use it at your own risk.\u003c\/p\u003e","brand":"Bykski","offers":[{"title":"Default Title","offer_id":40157874618466,"sku":"N-EV3090KP-TC","price":359.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0069\/8102\/5892\/files\/4fe8ab4a-dde3-45ea-94e1-4ac3bb34e6a6.jpg?v=1741805444"},{"product_id":"bykski-distro-plate-for-phanteks-ph-es515etg-pmma-w-5v-addressable-rgbrbw-rgv-pha-pk515e-p","title":"Bykski Distro Plate For PHANTEKS PH-ES515ETG - PMMA w\/ 5v Addressable RGB(RBW) (RGV-PHA-PK515E-P)","description":"\u003cp\u003eThe Bykski Distro or Distribution Plates provide a distinct and innovative way to enhance your loop's appearance. These plates are customized to fit your specific case, creating a sleek and parallel look. Moreover, they can come equipped with an OPTIONAL inline pump, allowing you to power your entire loop from the centerpiece.\u003c\/p\u003e\u003cp\u003eThe Distro Plate is built using PMMA material, featuring G 1\/4 threads, and is designed to be compatible with the PHANTEKS PH-ES515ETG case. It works well with Aluminum and Non-Aluminum loops and is engineered to support radiators up to 30mm thick or less.\u003c\/p\u003e\u003cp\u003eIn addition to the Distro Plate itself, the package includes mounting hardware, an A-RGB (RBW) LED strip, and the option of including a DDC pump with armor, a DDC pump with LCD, or no pump at all. Bykski Distro Plates are an excellent option for those looking for a clean, visually appealing water-cooling solution that provides high-quality performance.\u003c\/p\u003e\u003cp\u003e\u003cbr\u003eSpecifications - Distro Plate\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eMaterial: PMMA\u003c\/li\u003e\n\u003cli\u003eThread: G 1\/4\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eCompatibility\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eCompatible with PHANTEKS PH-ES515ETG case\u003c\/li\u003e\n\u003cli\u003eLoop: Aluminum or Non-Aluminum\u003c\/li\u003e\n\u003cli\u003eRadiator: Designed for 30mm thick or less\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eIncluded Parts\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e1x Distro plate\u003c\/li\u003e\n\u003cli\u003eMounting Hardware\u003c\/li\u003e\n\u003cli\u003eA-RGB (RBW) LED Strip\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eOptional DDC pump with armor, DDC pump with LCD, or \u003c\/em\u003e\u003cem\u003eNo Pump Included\u003c\/em\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cbr\u003eSpecifications - \u003cstrong\u003e\u003cem\u003eOptional DDC\u003c\/em\u003e\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eHeatsink Material: Aluminum\u003c\/li\u003e\n\u003cli\u003ePower: Standard 4-pin power connector and a PWM 4-Pin header\u003c\/li\u003e\n\u003cli\u003eVoltage Range: 10V - 15V DC\u003c\/li\u003e\n\u003cli\u003eMTBF (Mean Time Between Failure): 50,000 hours equivalent to 5 years of lifetime\u003c\/li\u003e\n\u003cli\u003eMaximum discharge:~ 132 GPH (600 LPH)\u003c\/li\u003e\n\u003cli\u003eMax RPM:5000\u003c\/li\u003e\n\u003cli\u003eDimensions:62 x 62 x 58mm\u003c\/li\u003e\n\u003cli\u003eThe performance will vary based on the cooling loop dynamic\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cbr\u003eWarnings\u003cbr\u003eThis distro is designed specifically for this case. Depending on the motherboard, blocks, fittings used, and layout, the connecting tubing may not appear as pictured (perfectly horizontal). Not responsible for any hardware damage. Use at your own risk.\u003c\/p\u003e","brand":"Bykski","offers":[{"title":"DDC Pump With Armor","offer_id":40407290675298,"sku":"RGV-PHA-PK515E-P-K","price":323.99,"currency_code":"USD","in_stock":true},{"title":"DDC Pump With LCD","offer_id":40407290708066,"sku":"RGV-PHA-PK515E-P-KG","price":407.99,"currency_code":"USD","in_stock":true},{"title":"No Pump","offer_id":40407290740834,"sku":"RGV-PHA-PK515E-P","price":263.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0069\/8102\/5892\/files\/93f90f9a-506b-48df-bb26-afb9b787e06d.jpg?v=1781321393"},{"product_id":"bykski-distro-plate-for-inwin-303-5-pmma-w-5v-addressable-rgbrbw-rgv-inw-303-5-p","title":"Bykski Distro Plate For InWin 303-5 - PMMA w\/ 5v Addressable RGB(RBW) (RGV-INW-303-5-P)","description":"\u003cp\u003eThe Bykski Distro or Distribution Plates provide a distinct and innovative way to enhance your loop's appearance. These plates are customized to fit your specific case, creating a sleek and parallel look. Moreover, they can come equipped with an OPTIONAL inline pump, allowing you to power your entire loop from the centerpiece.\u003c\/p\u003e\u003cp\u003eThe Distro Plate is built using PMMA material, featuring G 1\/4 threads, and is designed to be compatible with the IN WIN 303-5 case. It works well with Aluminum and Non-Aluminum loops and is engineered to support radiators up to 30mm thick or less.\u003c\/p\u003e\u003cp\u003eIn addition to the Distro Plate itself, the package includes mounting hardware, an A-RGB (RBW) LED strip, and the option of including a DDC pump with armor, a DDC pump with LCD, or no pump at all. Bykski Distro Plates are an excellent option for those looking for a clean, visually appealing water-cooling solution that provides high-quality performance.\u003c\/p\u003e\u003cp\u003e\u003cbr\u003eSpecifications - Distro Plate\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eMaterial: PMMA\u003c\/li\u003e\n\u003cli\u003eThread: G 1\/4\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eCompatibility\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eCompatible with IN WIN 303-5 case\u003c\/li\u003e\n\u003cli\u003eLoop: Aluminum or Non-Aluminum\u003c\/li\u003e\n\u003cli\u003eRadiator: Designed for 30mm thick or less\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eIncluded Parts\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e1x Distro plate\u003c\/li\u003e\n\u003cli\u003eMounting Hardware\u003c\/li\u003e\n\u003cli\u003eA-RGB (RBW) LED Strip\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eOptional DDC pump with armor, DDC pump with LCD, or \u003c\/em\u003e\u003cem\u003eNo Pump Included\u003c\/em\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cbr\u003eSpecifications - \u003cstrong\u003e\u003cem\u003eOptional DDC\u003c\/em\u003e\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eHeatsink Material: Aluminum\u003c\/li\u003e\n\u003cli\u003ePower: Standard 4-pin power connector and a PWM 4-Pin header\u003c\/li\u003e\n\u003cli\u003eVoltage Range: 10V - 15V DC\u003c\/li\u003e\n\u003cli\u003eMTBF (Mean Time Between Failure): 50,000 hours equivalent to 5 years of lifetime\u003c\/li\u003e\n\u003cli\u003eMaximum discharge:~ 132 GPH (600 LPH)\u003c\/li\u003e\n\u003cli\u003eMax RPM:5000\u003c\/li\u003e\n\u003cli\u003eDimensions:62 x 62 x 58mm\u003c\/li\u003e\n\u003cli\u003eThe performance will vary based on the cooling loop dynamic\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cbr\u003eWarnings\u003cbr\u003eThis block is designed specifically for this case. Depending on the motherboard, blocks, fittings used, and layout, the connecting tubing may not appear as pictured (perfectly horizontal). Not responsible for any hardware damage. Use at your own risk.\u003c\/p\u003e","brand":"Bykski","offers":[{"title":"DDC Pump With Armor","offer_id":40419252338786,"sku":"RGV-INW-303-5-P-K","price":311.99,"currency_code":"USD","in_stock":true},{"title":"DDC Pump With LCD","offer_id":40419252371554,"sku":"RGV-INW-303-5-P-KG","price":407.99,"currency_code":"USD","in_stock":true},{"title":"No Pump","offer_id":40419252404322,"sku":"RGV-INW-303-5-P","price":263.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0069\/8102\/5892\/files\/403238da-1eae-40a2-9d24-fa8e27983a8a.jpg?v=1781321820"},{"product_id":"bykski-distro-plate-for-jonsbo-mod-5-pmma-w-5v-addressable-rgbrbw-rgv-jsb-mod5-p","title":"Bykski Distro Plate For JONSBO MOD 5 - PMMA w\/ 5v Addressable RGB(RBW) RGV-JSB-MOD5-P)","description":"\u003cp\u003eThe Bykski Distro or Distribution Plates provide a distinct and innovative way to enhance your loop's appearance. These plates are customized to fit your specific case, creating a sleek and parallel look. Moreover, they can come equipped with an OPTIONAL inline pump, allowing you to power your entire loop from the centerpiece.\u003c\/p\u003e\u003cp\u003eThe Distro Plate is built using PMMA material, featuring G 1\/4 threads, and is designed to be compatible with the JONSBO MOD 5 case. It works well with Aluminum and Non-Aluminum loops and is engineered to support radiators up to 30mm thick or less.\u003c\/p\u003e\u003cp\u003eIn addition to the Distro Plate itself, the package includes mounting hardware, an A-RGB (RBW) LED strip, and the option of including a DDC pump with armor, a DDC pump with LCD, or no pump at all. Bykski Distro Plates are an excellent option for those looking for a clean, visually appealing water-cooling solution that provides high-quality performance.\u003c\/p\u003e\u003cp\u003e\u003cbr\u003eSpecifications - Distro Plate\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eMaterial: PMMA\u003c\/li\u003e\n\u003cli\u003eThread: G 1\/4\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eCompatibility\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eCompatible with JONSBO MOD 5 case\u003c\/li\u003e\n\u003cli\u003eLoop: Aluminum or Non-Aluminum\u003c\/li\u003e\n\u003cli\u003eRadiator: Designed for 30mm thick or less\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eIncluded Parts\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e1x Distro plate\u003c\/li\u003e\n\u003cli\u003eMounting Hardware\u003c\/li\u003e\n\u003cli\u003eA-RGB (RBW) LED Strip\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eOptional DDC pump with armor, DDC pump with LCD, or \u003c\/em\u003e\u003cem\u003eNo Pump Included\u003c\/em\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cbr\u003eSpecifications - \u003cstrong\u003e\u003cem\u003eOptional DDC\u003c\/em\u003e\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eHeatsink Material: Aluminum\u003c\/li\u003e\n\u003cli\u003ePower: Standard 4-pin power connector and a PWM 4-Pin header\u003c\/li\u003e\n\u003cli\u003eVoltage Range: 10V - 15V DC\u003c\/li\u003e\n\u003cli\u003eMTBF (Mean Time Between Failure): 50,000 hours equivalent to 5 years of lifetime\u003c\/li\u003e\n\u003cli\u003eMaximum discharge:~ 132 GPH (600 LPH)\u003c\/li\u003e\n\u003cli\u003eMax RPM:5000\u003c\/li\u003e\n\u003cli\u003eDimensions:62 x 62 x 58mm\u003c\/li\u003e\n\u003cli\u003eThe performance will vary based on the cooling loop dynamic\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cbr\u003eImportant Note:\u003cbr\u003eThis distro is designed for this case only. The tubing may not align perfectly horizontally due to variations in the motherboard, blocks, fittings, and layout. Not responsible for any hardware damage. Please use at your own risk.\u003c\/p\u003e","brand":"Bykski","offers":[{"title":"DDC Pump With Armor","offer_id":40571530346594,"sku":"RGV-JSB-MOD5-P-K","price":323.99,"currency_code":"USD","in_stock":true},{"title":"DDC Pump With LCD","offer_id":40571530379362,"sku":"RGV-JSB-MOD5-P-KG","price":407.99,"currency_code":"USD","in_stock":true},{"title":"No Pump","offer_id":40571530412130,"sku":"RGV-JSB-MOD5-P","price":263.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0069\/8102\/5892\/files\/d79bc64a-5934-470b-a887-bd71245f8c76.jpg?v=1781323387"},{"product_id":"bykski-distro-plate-for-master-cosmos-ii-pmma-w-5v-addressable-rgbrbw-rgv-cm-cos2-25th-p","title":"Bykski Distro Plate For Cooler Master Cosmos II - PMMA w\/ 5v Addressable RGB(RBW) (RGV-CM-COS2-25TH-P)","description":"\u003cp\u003eThe Bykski Distro or Distribution Plates provide a distinct and innovative way to enhance your loop's appearance. These plates are customized to fit your specific case, creating a sleek and parallel look. Moreover, they can come equipped with an OPTIONAL inline pump, allowing you to power your entire loop from the centerpiece.\u003c\/p\u003e\u003cp\u003eThe Distro Plate is built using PMMA material, featuring G 1\/4 threads, and is designed to be compatible with Cool Master Cosmos II case. It works well with Aluminum and Non-Aluminum loops and is engineered to support radiators up to 30mm thick or less.\u003c\/p\u003e\u003cp\u003eIn addition to the Distro Plate itself, the package includes mounting hardware, an A-RGB (RBW) LED strip, and the option of including a DDC pump with armor, a DDC pump with LCD, or no pump at all. Bykski Distro Plates are an excellent option for those looking for a clean, visually appealing water-cooling solution that provides high-quality performance.\u003c\/p\u003e\u003cp\u003e\u003cbr\u003eSpecifications - Distro Plate\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eMaterial: PMMA\u003c\/li\u003e\n\u003cli\u003eThread: G 1\/4\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eCompatibility\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eCompatible with Cool Master Cosmos II case\u003c\/li\u003e\n\u003cli\u003eLoop: Aluminum or Non-Aluminum\u003c\/li\u003e\n\u003cli\u003eRadiator: Designed for 30mm thick or less\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eIncluded Parts\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e1x Distro plate\u003c\/li\u003e\n\u003cli\u003eMounting Hardware\u003c\/li\u003e\n\u003cli\u003eA-RGB (RBW) LED Strip\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eOptional Black DDC pump with armor, DDC pump with LCD, or \u003c\/em\u003e\u003cem\u003eNo Pump Included\u003c\/em\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cbr\u003eSpecifications - \u003cstrong\u003e\u003cem\u003eOptional DDC\u003c\/em\u003e\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eHeatsink Material: Aluminum\u003c\/li\u003e\n\u003cli\u003ePower: Standard 4-pin power connector and a PWM 4-Pin header\u003c\/li\u003e\n\u003cli\u003eVoltage Range: 10V - 15V DC\u003c\/li\u003e\n\u003cli\u003eMTBF (Mean Time Between Failure): 50,000 hours equivalent to 5 years of lifetime\u003c\/li\u003e\n\u003cli\u003eMaximum discharge:~ 132 GPH (600 LPH)\u003c\/li\u003e\n\u003cli\u003eMax RPM:5000\u003c\/li\u003e\n\u003cli\u003eDimensions:62 x 62 x 58mm\u003c\/li\u003e\n\u003cli\u003eThe performance will vary based on the cooling loop dynamic\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cbr\u003eImportant Note:\u003cbr\u003eThis distro is designed for this case only. The tubing may not align perfectly horizontally due to variations in the motherboard, blocks, fittings, and layout. Not responsible for any hardware damage. Please use at your own risk.\u003c\/p\u003e","brand":"Bykski","offers":[{"title":"DDC Pump With Armor","offer_id":40571535327330,"sku":"RGV-CM-COS2-25TH-P-K","price":323.99,"currency_code":"USD","in_stock":true},{"title":"DDC Pump With LCD","offer_id":40571535360098,"sku":"RGV-CM-COS2-25TH-P-KG","price":407.99,"currency_code":"USD","in_stock":true},{"title":"No Pump","offer_id":40571535392866,"sku":"RGV-CM-COS2-25TH-P","price":263.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0069\/8102\/5892\/files\/19286169-ba74-4f44-8325-4d0e3b08e799.jpg?v=1781323494"},{"product_id":"bykski-distro-plate-for-cougar-dark-blader-x5-pmma-w-5v-addressable-rgbrbw-rgv-cg-db-x5-p","title":"Bykski Distro Plate For COUGAR Dark Blader X5 - PMMA w\/ 5v Addressable RGB(RBW) (RGV-CG-DB-X5-P)","description":"\u003cp\u003eThe Bykski Distro or Distribution Plates provide a distinct and innovative way to enhance your loop's appearance. These plates are customized to fit your specific case, creating a sleek and parallel look. Moreover, they can come equipped with an OPTIONAL inline pump, allowing you to power your entire loop from the centerpiece.\u003c\/p\u003e\u003cp\u003eThe Distro Plate is built using PMMA material, featuring G 1\/4 threads, and is designed to be compatible with the COUGAR Dark Blader X5  case. It works well with Aluminum and Non-Aluminum loops and is engineered to support radiators up to 30mm thick or less.\u003c\/p\u003e\u003cp\u003eIn addition to the Distro Plate itself, the package includes mounting hardware, an A-RGB (RBW) LED strip, and the option of including a DDC pump with armor, a DDC pump with LCD, or no pump at all. Bykski Distro Plates are an excellent option for those looking for a clean, visually appealing water-cooling solution that provides high-quality performance.\u003c\/p\u003e\u003cp\u003e\u003cbr\u003eSpecifications - Distro Plate\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eMaterial: PMMA\u003c\/li\u003e\n\u003cli\u003eThread: G 1\/4\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eCompatibility\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eCompatible with COUGAR Dark Blader X5 case\u003c\/li\u003e\n\u003cli\u003eLoop: Aluminum or Non-Aluminum\u003c\/li\u003e\n\u003cli\u003eRadiator: Designed for 30mm thick or less\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eIncluded Parts\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e1x Distro plate\u003c\/li\u003e\n\u003cli\u003eMounting Hardware\u003c\/li\u003e\n\u003cli\u003eA-RGB (RBW) LED Strip\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eOptional DDC pump with armor, DDC pump with LCD, or \u003c\/em\u003e\u003cem\u003eNo Pump Included\u003c\/em\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cbr\u003eSpecifications - \u003cstrong\u003e\u003cem\u003eOptional DDC\u003c\/em\u003e\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eHeatsink Material: Aluminum\u003c\/li\u003e\n\u003cli\u003ePower: Standard 4-pin power connector and a PWM 4-Pin header\u003c\/li\u003e\n\u003cli\u003eVoltage Range: 10V - 15V DC\u003c\/li\u003e\n\u003cli\u003eMTBF (Mean Time Between Failure): 50,000 hours equivalent to 5 years of lifetime\u003c\/li\u003e\n\u003cli\u003eMaximum discharge:~ 132 GPH (600 LPH)\u003c\/li\u003e\n\u003cli\u003eMax RPM:5000\u003c\/li\u003e\n\u003cli\u003eDimensions:62 x 62 x 58mm\u003c\/li\u003e\n\u003cli\u003eThe performance will vary based on the cooling loop dynamic\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cbr\u003eImportant Note:\u003cbr\u003eThis distro is designed for this case only. The tubing may not align perfectly horizontally due to variations in the motherboard, blocks, fittings, and layout. Not responsible for any hardware damage. Please use at your own risk.\u003c\/p\u003e","brand":"Bykski","offers":[{"title":"DDC Pump With Armor","offer_id":40571553022050,"sku":"RGV-CG-DB-X5-P-K","price":323.99,"currency_code":"USD","in_stock":true},{"title":"DDC Pump With LCD","offer_id":40571553054818,"sku":"RGV-CG-DB-X5-P-KG","price":407.99,"currency_code":"USD","in_stock":true},{"title":"No Pump","offer_id":40571553087586,"sku":"RGV-CG-DB-X5-P","price":263.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0069\/8102\/5892\/files\/1bff6e13-fd71-423f-8fe3-27cf7e347ef3.jpg?v=1781323545"},{"product_id":"bykski-distro-plate-for-cougar-panzer-evo-pmma-w-5v-addressable-rgbrbw-rgv-cg-panzerevo-p","title":"Bykski Distro Plate For COUGAR Panzer Evo - PMMA w\/ 5v Addressable RGB(RBW) (RGV-CG-PanzerEvo-P)","description":"\u003cp\u003eThe Bykski Distro or Distribution Plates provide a distinct and innovative way to enhance your loop's appearance. These plates are customized to fit your specific case, creating a sleek and parallel look. Moreover, they can come equipped with an OPTIONAL inline pump, allowing you to power your entire loop from the centerpiece.\u003c\/p\u003e\u003cp\u003eThe Distro Plate is built using PMMA material, featuring G 1\/4 threads, and is designed to be compatible with the \u003cspan data-sheets-value='{\"1\":2,\"2\":\"COUGAR Panzer Evo\"}' data-sheets-userformat='{\"2\":14911,\"3\":{\"1\":0},\"4\":{\"1\":2,\"2\":16776960},\"5\":{\"1\":[{\"1\":2,\"2\":0,\"5\":{\"1\":0}},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"6\":{\"1\":[{\"1\":2,\"2\":0,\"5\":{\"1\":0}},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"7\":{\"1\":[{\"1\":2,\"2\":0,\"5\":{\"1\":0}},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"8\":{\"1\":[{\"1\":2,\"2\":0,\"5\":{\"1\":0}},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"12\":0,\"14\":{\"1\":2,\"2\":4210752},\"15\":\"Arial\",\"16\":10}' style=\"font-size: 10pt; font-family: Arial; color: rgb(64, 64, 64);\"\u003eCOUGAR Panzer Evo\u003c\/span\u003e case. It works well with Aluminum and Non-Aluminum loops and is engineered to support radiators up to 30mm thick or less.\u003c\/p\u003e\u003cp\u003eIn addition to the Distro Plate itself, the package includes mounting hardware, an A-RGB (RBW) LED strip, and the option of including a DDC pump with armor, a DDC pump with LCD, or no pump at all. Bykski Distro Plates are an excellent option for those looking for a clean, visually appealing water-cooling solution that provides high-quality performance.\u003c\/p\u003e\u003cp\u003e\u003cbr\u003eSpecifications - Distro Plate\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eMaterial: PMMA\u003c\/li\u003e\n\u003cli\u003eThread: G 1\/4\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eCompatibility\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eCompatible with \u003cspan data-sheets-value='{\"1\":2,\"2\":\"COUGAR Panzer Evo\"}' data-sheets-userformat='{\"2\":14911,\"3\":{\"1\":0},\"4\":{\"1\":2,\"2\":16776960},\"5\":{\"1\":[{\"1\":2,\"2\":0,\"5\":{\"1\":0}},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"6\":{\"1\":[{\"1\":2,\"2\":0,\"5\":{\"1\":0}},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"7\":{\"1\":[{\"1\":2,\"2\":0,\"5\":{\"1\":0}},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"8\":{\"1\":[{\"1\":2,\"2\":0,\"5\":{\"1\":0}},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"12\":0,\"14\":{\"1\":2,\"2\":4210752},\"15\":\"Arial\",\"16\":10}' style=\"font-size: 10pt; font-family: Arial; color: rgb(64, 64, 64);\"\u003eCOUGAR Panzer Evo\u003c\/span\u003e case\u003c\/li\u003e\n\u003cli\u003eLoop: Aluminum or Non-Aluminum\u003c\/li\u003e\n\u003cli\u003eRadiator: Designed for 30mm thick or less\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eIncluded Parts\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e1x Distro plate\u003c\/li\u003e\n\u003cli\u003eMounting Hardware\u003c\/li\u003e\n\u003cli\u003eA-RGB (RBW) LED Strip\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eOptional DDC pump with armor, DDC pump with LCD, or \u003c\/em\u003e\u003cem\u003eNo Pump Included\u003c\/em\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cbr\u003eSpecifications - \u003cstrong\u003e\u003cem\u003eOptional DDC\u003c\/em\u003e\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eHeatsink Material: Aluminum\u003c\/li\u003e\n\u003cli\u003ePower: Standard 4-pin power connector and a PWM 4-Pin header\u003c\/li\u003e\n\u003cli\u003eVoltage Range: 10V - 15V DC\u003c\/li\u003e\n\u003cli\u003eMTBF (Mean Time Between Failure): 50,000 hours equivalent to 5 years of lifetime\u003c\/li\u003e\n\u003cli\u003eMaximum discharge:~ 132 GPH (600 LPH)\u003c\/li\u003e\n\u003cli\u003eMax RPM:5000\u003c\/li\u003e\n\u003cli\u003eDimensions:62 x 62 x 58mm\u003c\/li\u003e\n\u003cli\u003eThe performance will vary based on the cooling loop dynamic\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cbr\u003eImportant Note:\u003cbr\u003eThis distro is designed for this case only. The tubing may not align perfectly horizontally due to variations in the motherboard, blocks, fittings, and layout. Not responsible for any hardware damage. Please use at your own risk.\u003c\/p\u003e","brand":"Bykski","offers":[{"title":"DDC Pump With Armor","offer_id":40579298623586,"sku":"RGV-CG-PanzerEvo-P-K","price":323.99,"currency_code":"USD","in_stock":true},{"title":"DDC Pump With LCD","offer_id":40579298656354,"sku":"RGV-CG-PanzerEvo-P-KG","price":407.99,"currency_code":"USD","in_stock":true},{"title":"No Pump","offer_id":40579298689122,"sku":"RGV-CG-PanzerEvo-P","price":263.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0069\/8102\/5892\/files\/2cbbacf2-94bc-49c8-ad8d-77ff08b887da.jpg?v=1781323689"},{"product_id":"bykski-distro-plate-for-cougar-conquer-2-pmma-w-5v-addressable-rgbrbw-rgv-cg-zfz-vg-p","title":"Bykski Distro Plate For COUGAR CONQUER 2 - PMMA w\/ 5v Addressable RGB(RBW) (RGV-CG-ZFZ-VG-P)","description":"\u003cp\u003eThe Bykski Distro or Distribution Plates provide a distinct and innovative way to enhance your loop's appearance. These plates are customized to fit your specific case, creating a sleek and parallel look. Moreover, they can come equipped with an OPTIONAL inline pump, allowing you to power your entire loop from the centerpiece.\u003c\/p\u003e\u003cp\u003eThe Distro Plate is built using PMMA material, featuring G 1\/4 threads, and is designed to be compatible with the COUGAR CONQUER 2 case. It works well with Aluminum and Non-Aluminum loops and is engineered to support radiators up to 30mm thick or less.\u003c\/p\u003e\u003cp\u003eIn addition to the Distro Plate itself, the package includes mounting hardware, an A-RGB (RBW) LED strip, and the option of including a DDC pump with armor, a DDC pump with LCD, or no pump at all. Bykski Distro Plates are an excellent option for those looking for a clean, visually appealing water-cooling solution that provides high-quality performance.\u003c\/p\u003e\u003cp\u003e\u003cbr\u003eSpecifications - Distro Plate\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eMaterial: PMMA\u003c\/li\u003e\n\u003cli\u003eThread: G 1\/4\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eCompatibility\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eCompatible with COUGAR CONQUER 2 case\u003c\/li\u003e\n\u003cli\u003eLoop: Aluminum or Non-Aluminum\u003c\/li\u003e\n\u003cli\u003eRadiator: Designed for 30mm thick or less\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eIncluded Parts\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e1x Distro plate\u003c\/li\u003e\n\u003cli\u003eMounting Hardware\u003c\/li\u003e\n\u003cli\u003eA-RGB (RBW) LED Strip\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eOptional DDC pump with armor, DDC pump with LCD, or \u003c\/em\u003e\u003cem\u003eNo Pump Included\u003c\/em\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cbr\u003eSpecifications - \u003cstrong\u003e\u003cem\u003eOptional DDC\u003c\/em\u003e\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eHeatsink Material: Aluminum\u003c\/li\u003e\n\u003cli\u003ePower: Standard 4-pin power connector and a PWM 4-Pin header\u003c\/li\u003e\n\u003cli\u003eVoltage Range: 10V - 15V DC\u003c\/li\u003e\n\u003cli\u003eMTBF (Mean Time Between Failure): 50,000 hours equivalent to 5 years of lifetime\u003c\/li\u003e\n\u003cli\u003eMaximum discharge:~ 132 GPH (600 LPH)\u003c\/li\u003e\n\u003cli\u003eMax RPM:5000\u003c\/li\u003e\n\u003cli\u003eDimensions:62 x 62 x 58mm\u003c\/li\u003e\n\u003cli\u003eThe performance will vary based on the cooling loop dynamic\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cbr\u003eImportant Note:\u003cbr\u003eThis distro is designed for this case only. The tubing may not align perfectly horizontally due to variations in the motherboard, blocks, fittings, and layout. Not responsible for any hardware damage. Please use at your own risk.\u003c\/p\u003e","brand":"Bykski","offers":[{"title":"DDC Pump With Armor","offer_id":40579302555746,"sku":"RGV-CG-ZFZ-VG-P-K","price":323.99,"currency_code":"USD","in_stock":false},{"title":"DDC Pump With LCD","offer_id":40579302588514,"sku":"RGV-CG-ZFZ-VG-P-KG","price":407.99,"currency_code":"USD","in_stock":true},{"title":"No Pump","offer_id":40579302621282,"sku":"RGV-CG-ZFZ-VG-P","price":263.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0069\/8102\/5892\/files\/b7833366-1a40-4b0d-af66-d7a73ba9b9e2.jpg?v=1781323725"},{"product_id":"bykski-distro-plate-for-deepcool-space-station-pmma-w-5v-addressable-rgbrbw-rgv-dp-spc-p-v2","title":"Bykski Distro Plate For DEEPCOOL SPACE STATION - PMMA w\/ 5v Addressable RGB(RBW) (RGV-DP-SPC-P-V2)","description":"\u003cp\u003eThe Bykski Distro or Distribution Plates provide a distinct and innovative way to enhance your loop's appearance. These plates are customized to fit your specific case, creating a sleek and parallel look. Moreover, they can come equipped with an OPTIONAL inline pump, allowing you to power your entire loop from the centerpiece.\u003c\/p\u003e\u003cp\u003eThe Distro Plate is built using PMMA material, featuring G 1\/4 threads, and is designed to be compatible with the  DEEPCOOL SPACE STATION case. It works well with Aluminum and Non-Aluminum loops and is engineered to support radiators up to 30mm thick or less.\u003c\/p\u003e\u003cp\u003eIn addition to the Distro Plate itself, the package includes mounting hardware, an A-RGB (RBW) LED strip, and the option of including a DDC pump with armor, a DDC pump with LCD, or no pump at all. Bykski Distro Plates are an excellent option for those looking for a clean, visually appealing water-cooling solution that provides high-quality performance.\u003c\/p\u003e\u003cp\u003e\u003cbr\u003eSpecifications - Distro Plate\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eMaterial: PMMA\u003c\/li\u003e\n\u003cli\u003eThread: G 1\/4\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eCompatibility\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eCompatible with  DEEPCOOL SPACE STATION case\u003c\/li\u003e\n\u003cli\u003eLoop: Aluminum or Non-Aluminum\u003c\/li\u003e\n\u003cli\u003eRadiator: Designed for 30mm thick or less\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eIncluded Parts\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e1x Distro plate\u003c\/li\u003e\n\u003cli\u003eMounting Hardware\u003c\/li\u003e\n\u003cli\u003eA-RGB (RBW) LED Strip\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eOptional DDC pump with armor, DDC pump with LCD, or \u003c\/em\u003e\u003cem\u003eNo Pump Included\u003c\/em\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cbr\u003eSpecifications - \u003cstrong\u003e\u003cem\u003eOptional DDC\u003c\/em\u003e\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eHeatsink Material: Aluminum\u003c\/li\u003e\n\u003cli\u003ePower: Standard 4-pin power connector and a PWM 4-Pin header\u003c\/li\u003e\n\u003cli\u003eVoltage Range: 10V - 15V DC\u003c\/li\u003e\n\u003cli\u003eMTBF (Mean Time Between Failure): 50,000 hours equivalent to 5 years of lifetime\u003c\/li\u003e\n\u003cli\u003eMaximum discharge:~ 132 GPH (600 LPH)\u003c\/li\u003e\n\u003cli\u003eMax RPM:5000\u003c\/li\u003e\n\u003cli\u003eDimensions:62 x 62 x 58mm\u003c\/li\u003e\n\u003cli\u003eThe performance will vary based on the cooling loop dynamic\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cbr\u003eImportant Note:\u003cbr\u003eThis distro is designed for this case only. The tubing may not align perfectly horizontally due to variations in the motherboard, blocks, fittings, and layout. Not responsible for any hardware damage. Please use at your own risk.\u003c\/p\u003e","brand":"Bykski","offers":[{"title":"DDC Pump With Armor","offer_id":40597671215202,"sku":"RGV-DP-SPC-P-V2-K","price":323.99,"currency_code":"USD","in_stock":false},{"title":"DDC Pump With LCD","offer_id":40597671247970,"sku":"RGV-DP-SPC-P-KG","price":407.99,"currency_code":"USD","in_stock":true},{"title":"No Pump","offer_id":40597671280738,"sku":"RGV-DP-SPC-P-V2","price":263.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0069\/8102\/5892\/files\/a77f18ea-eed7-4f26-a4cd-532c44b789de.jpg?v=1781324012"},{"product_id":"bykski-distro-plate-for-phanteks-217-xe-pmma-w-5v-addressable-rgbrbw-rgv-pha-217-p","title":"Bykski Distro Plate For PHANTEKS 217 XE - PMMA w\/ 5v Addressable RGB(RBW) (RGV-PHA-217-P)","description":"\u003cp\u003eThe Bykski Distro or Distribution Plates provide a distinct and innovative way to enhance your loop's appearance. These plates are customized to fit your specific case, creating a sleek and parallel look. Moreover, they can come equipped with an OPTIONAL inline pump, allowing you to power your entire loop from the centerpiece.\u003c\/p\u003e\u003cp\u003eThe Distro Plate is built using PMMA material, featuring G 1\/4 threads, and is designed to be compatible with the PHANTEKS 217XE case. It works well with Aluminum and Non-Aluminum loops and is engineered to support radiators up to 30mm thick or less.\u003c\/p\u003e\u003cp\u003eIn addition to the Distro Plate itself, the package includes mounting hardware, an A-RGB (RBW) LED strip, and the option of including a DDC pump with armor, a DDC pump with LCD, or no pump at all. Bykski Distro Plates are an excellent option for those looking for a clean, visually appealing water-cooling solution that provides high-quality performance.\u003c\/p\u003e\u003cp\u003e\u003cbr\u003eSpecifications - Distro Plate\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eMaterial: PMMA\u003c\/li\u003e\n\u003cli\u003eThread: G 1\/4\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eCompatibility\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eCompatible with  PHANTEKS 217XE case\u003c\/li\u003e\n\u003cli\u003eLoop: Aluminum or Non-Aluminum\u003c\/li\u003e\n\u003cli\u003eRadiator: Designed for 30mm thick or less\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eIncluded Parts\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e1x Distro plate\u003c\/li\u003e\n\u003cli\u003eMounting Hardware\u003c\/li\u003e\n\u003cli\u003eA-RGB (RBW) LED Strip\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eOptional DDC pump with armor, DDC pump with LCD, or \u003c\/em\u003e\u003cem\u003eNo Pump Included\u003c\/em\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cbr\u003eSpecifications - \u003cstrong\u003e\u003cem\u003eOptional DDC\u003c\/em\u003e\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eHeatsink Material: Aluminum\u003c\/li\u003e\n\u003cli\u003ePower: Standard 4-pin power connector and a PWM 4-Pin header\u003c\/li\u003e\n\u003cli\u003eVoltage Range: 10V - 15V DC\u003c\/li\u003e\n\u003cli\u003eMTBF (Mean Time Between Failure): 50,000 hours equivalent to 5 years of lifetime\u003c\/li\u003e\n\u003cli\u003eMaximum discharge:~ 132 GPH (600 LPH)\u003c\/li\u003e\n\u003cli\u003eMax RPM:5000\u003c\/li\u003e\n\u003cli\u003eDimensions:62 x 62 x 58mm\u003c\/li\u003e\n\u003cli\u003eThe performance will vary based on the cooling loop dynamic\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cbr\u003eImportant Note:\u003cbr\u003eThis distro is designed for this case only. The tubing may not align perfectly horizontally due to variations in the motherboard, blocks, fittings, and layout. Not responsible for any hardware damage. Please use at your own risk.\u003c\/p\u003e","brand":"Bykski","offers":[{"title":"DDC Pump With Armor","offer_id":40607796297826,"sku":"RGV-PHA-217-P-K","price":323.99,"currency_code":"USD","in_stock":false},{"title":"DDC Pump With LCD","offer_id":40607796330594,"sku":"RGV-PHA-217-P-KG","price":407.99,"currency_code":"USD","in_stock":true},{"title":"No Pump","offer_id":40607796363362,"sku":"RGV-PHA-217-P","price":263.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0069\/8102\/5892\/files\/a5658be7-f5cb-4838-b71a-70f97070d455.jpg?v=1781324206"},{"product_id":"bykski-distro-plate-for-phanteks-ph-ec416ptg-pmma-w-5v-addressable-rgbrbw-rgv-pha-416-p","title":"Bykski Distro Plate For PHANTEKS ECLIPSE P400 (PH-EC416PTG) - PMMA w\/ 5v Addressable RGB(RBW) (RGV-PHA-416-P)","description":"\u003cp\u003eThe Bykski Distro or Distribution Plates provide a distinct and innovative way to enhance your loop's appearance. These plates are customized to fit your specific case, creating a sleek and parallel look. Moreover, they can come equipped with an OPTIONAL inline pump, allowing you to power your entire loop from the centerpiece.\u003c\/p\u003e\u003cp\u003eThe Distro Plate is built using PMMA material, featuring G 1\/4 threads, and is designed to be compatible with the \u003cspan data-sheets-root=\"1\" data-sheets-value='{\"1\":2,\"2\":\"PHANTEKS PH-EC416PTG\"}' data-sheets-userformat='{\"2\":14911,\"3\":{\"1\":0},\"4\":{\"1\":2,\"2\":16776960},\"5\":{\"1\":[{\"1\":2,\"2\":0,\"5\":{\"1\":0}},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"6\":{\"1\":[{\"1\":2,\"2\":0,\"5\":{\"1\":0}},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"7\":{\"1\":[{\"1\":2,\"2\":0,\"5\":{\"1\":0}},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"8\":{\"1\":[{\"1\":2,\"2\":0,\"5\":{\"1\":0}},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"12\":0,\"14\":{\"1\":2,\"2\":4210752},\"15\":\"Arial\",\"16\":10}' style=\"font-size: 10pt; font-family: Arial; color: rgb(64, 64, 64);\"\u003ePHANTEKS ECLIPSE P400 (PH-EC416PTG)\u003c\/span\u003e case. It works well with Aluminum and Non-Aluminum loops and is engineered to support radiators up to 30mm thick or less.\u003c\/p\u003e\u003cp\u003eIn addition to the Distro Plate itself, the package includes mounting hardware, an A-RGB (RBW) LED strip, and the option of including a DDC pump with armor, a DDC pump with LCD, or no pump at all. Bykski Distro Plates are an excellent option for those looking for a clean, visually appealing water-cooling solution that provides high-quality performance.\u003c\/p\u003e\u003cp\u003e\u003cbr\u003eSpecifications - Distro Plate\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eMaterial: PMMA\u003c\/li\u003e\n\u003cli\u003eThread: G 1\/4\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eCompatibility\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eCompatible with \u003cspan data-sheets-root=\"1\" data-sheets-value='{\"1\":2,\"2\":\"PHANTEKS PH-EC416PTG\"}' data-sheets-userformat='{\"2\":14911,\"3\":{\"1\":0},\"4\":{\"1\":2,\"2\":16776960},\"5\":{\"1\":[{\"1\":2,\"2\":0,\"5\":{\"1\":0}},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"6\":{\"1\":[{\"1\":2,\"2\":0,\"5\":{\"1\":0}},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"7\":{\"1\":[{\"1\":2,\"2\":0,\"5\":{\"1\":0}},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"8\":{\"1\":[{\"1\":2,\"2\":0,\"5\":{\"1\":0}},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"12\":0,\"14\":{\"1\":2,\"2\":4210752},\"15\":\"Arial\",\"16\":10}' style=\"font-size: 10pt; font-family: Arial; color: rgb(64, 64, 64);\"\u003ePHANTEKS ECLIPSE P400 (PH-EC416PTG)\u003c\/span\u003e case\u003c\/li\u003e\n\u003cli\u003eLoop: Aluminum or Non-Aluminum\u003c\/li\u003e\n\u003cli\u003eRadiator: Designed for 30mm thick or less\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eIncluded Parts\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e1x Distro plate\u003c\/li\u003e\n\u003cli\u003eMounting Hardware\u003c\/li\u003e\n\u003cli\u003eA-RGB (RBW) LED Strip\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eOptional DDC pump with armor, DDC pump with LCD, or \u003c\/em\u003e\u003cem\u003eNo Pump Included\u003c\/em\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cbr\u003eSpecifications - \u003cstrong\u003e\u003cem\u003eOptional DDC\u003c\/em\u003e\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eHeatsink Material: Aluminum\u003c\/li\u003e\n\u003cli\u003ePower: Standard 4-pin power connector and a PWM 4-Pin header\u003c\/li\u003e\n\u003cli\u003eVoltage Range: 10V - 15V DC\u003c\/li\u003e\n\u003cli\u003eMTBF (Mean Time Between Failure): 50,000 hours equivalent to 5 years of lifetime\u003c\/li\u003e\n\u003cli\u003eMaximum discharge:~ 132 GPH (600 LPH)\u003c\/li\u003e\n\u003cli\u003eMax RPM:5000\u003c\/li\u003e\n\u003cli\u003eDimensions:62 x 62 x 58mm\u003c\/li\u003e\n\u003cli\u003eThe performance will vary based on the cooling loop dynamic\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cbr\u003eImportant Note:\u003cbr\u003eThis distro is designed for this case only. The tubing may not align perfectly horizontally due to variations in the motherboard, blocks, fittings, and layout. Not responsible for any hardware damage. Please use at your own risk.\u003c\/p\u003e","brand":"Bykski","offers":[{"title":"DDC Pump With Armor","offer_id":40608933052514,"sku":"RGV-PHA-416-P-K","price":323.99,"currency_code":"USD","in_stock":false},{"title":"DDC Pump With LCD","offer_id":40608933085282,"sku":"RGV-PHA-416-P-KG","price":407.99,"currency_code":"USD","in_stock":true},{"title":"No Pump","offer_id":40608933118050,"sku":"RGV-PHA-416-P","price":263.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0069\/8102\/5892\/files\/02fbbfe7-b871-411c-bab6-041e20bbd08f.jpg?v=1781324301"},{"product_id":"bykski-full-coverage-gpu-water-block-and-backplate-for-zotac-geforce-rtx-4060ti-apocalypse-oc-n-st4060titq-x","title":"Bykski Full Coverage GPU Water Block and Backplate For ZOTAC GeForce RTX 4060Ti Apocalypse OC (N-ST4060TITQ-X)","description":"\u003cp\u003eThis full coverage block directly cools the video card core (GPU), graphics memory (RAM), and voltage regulator modules (VRM). By directly cooling these components, you can achieve great temperatures and reach higher overclocks or extend the overall lifespan of your card by running at below-factory temperatures.\u003c\/p\u003e\u003cp\u003eThe block is constructed of high-purity copper that is nickel electroplated to prevent oxidation. A high-flow design is used to allow multiple blocks to run in series. Top and bottom ports can be used to configure parallel or serial designs in multi-block setups.\u003c\/p\u003e\u003ch5\u003e\n\u003cspan style=\"color: inherit;\"\u003eCompatibility\u003c\/span\u003e\u003cbr\u003e\n\u003c\/h5\u003e\u003cul\u003e\n\u003cli\u003eCompatible with ZOTAC GeForce RTX 4060Ti Apocalypse OC\u003c\/li\u003e\n\u003cli\u003eAfter narrowing your selection, Please check the entire PCB picture to ensure compatibility. If you have any questions, don't hesitate to contact support for confirmation.\u003c\/li\u003e\n\u003cli\u003e\u003cem\u003eCompatibility based on these circuit board designs only\u003c\/em\u003e\u003c\/li\u003e\n\u003cli\u003eFittings: G 1\/4in. Thread\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch5\u003eParts Included\u003c\/h5\u003e\u003cul\u003e\n\u003cli\u003e1x Full Coverage GPU Water Block\u003c\/li\u003e\n\u003cli\u003e1x Backplate\u003c\/li\u003e\n\u003cli\u003e2x Stop Fitting\u003c\/li\u003e\n\u003cli\u003e1x Mounting Hardware\u003c\/li\u003e\n\u003cli\u003eThermal grease\u003c\/li\u003e\n\u003cli\u003e1x 5v A-RGB (RBW) Light\u003c\/li\u003e\n\u003cli\u003e(Warning: Addressable RGB (RBW) is 5V and is ONLY compatible with Addressable RGB (RBW) components. RGB is 12V and is ONLY compatible with RGB components. Mix and match will NOT work and will cause damage.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch5\u003eWarnings\u003c\/h5\u003e\u003cp\u003eThis is a repair or replacement-only item. Returns are not accepted on compatibility issues or if the block has had water\/fluid run through it.\u003c\/p\u003e\u003cp\u003eThe manufacturer reserves the right to alter the block design to expand compatibility. The delivered item may not 100% match the pictured item. The product does NOT come with English instructions. Please see the product gallery images for the install guide if available. Generally, thermal pads should be installed on the card where the block has corresponding raised contact points, except the GPU core, which uses thermal paste. Installing pads on other components can lead to improper contact and poor performance.\u003c\/p\u003e\u003cp\u003eNot responsible for any damage caused by or when using this product. Please use it at your own risk.\u003c\/p\u003e","brand":"Bykski","offers":[{"title":"Default Title","offer_id":40658221498466,"sku":"N-ST4060TITQ-X","price":233.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0069\/8102\/5892\/files\/c478feab-22bd-4b56-9de9-0f3371c9ae44.jpg?v=1781324511"},{"product_id":"bykski-full-coverage-gpu-water-block-and-backplate-for-manli-geforce-rtx-4070-super-select-models-only-n-ml4070s-x","title":"Bykski Full Coverage GPU Water Block and Backplate For Manli GeForce RTX 4070 Super (SELECT MODELS ONLY) (N-ML4070S-X)","description":"\u003cp\u003eThis full coverage block directly cools the video card core (GPU), graphics memory (RAM), and voltage regulator modules (VRM). By directly cooling these components, you can achieve great temperatures and reach higher overclocks or extend the overall lifespan of your card by running at below-factory temperatures.\u003c\/p\u003e\u003cp\u003eThe block is constructed of high-purity copper that is nickel electroplated to prevent oxidation. A high-flow design is used to allow multiple blocks to run in series. Top and bottom ports can be used to configure parallel or serial designs in multi-block setups.\u003c\/p\u003e\u003ch5\u003eCompatibility\u003c\/h5\u003e\u003cp\u003eONLY Compatible  with\u003c\/p\u003e\u003cul\u003e\u003cli\u003e\u003cp\u003eManli GeForce RTX 4070 Super\u003c\/p\u003e\u003c\/li\u003e\u003c\/ul\u003e\u003ch5\u003eParts Included\u003c\/h5\u003e\u003cul\u003e\n\u003cli\u003e1x Full Coverage GPU Water Block\u003c\/li\u003e\n\u003cli\u003e1x Backplate\u003c\/li\u003e\n\u003cli\u003e2x Stop Fitting\u003c\/li\u003e\n\u003cli\u003e1x Mounting Hardware\u003c\/li\u003e\n\u003cli\u003eThermal grease\u003c\/li\u003e\n\u003cli\u003e1x 5v A-RGB (RBW) Light\u003c\/li\u003e\n\u003cli\u003e(Warning: Addressable RGB (RBW) is 5V and is ONLY compatible with Addressable RGB (RBW) components. RGB is 12V and is ONLY compatible with RGB components. Mix and match will NOT work and will cause damage.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch5\u003eWarnings\u003c\/h5\u003e\u003cp\u003eThis is a repair or replacement-only item. Returns are not accepted on compatibility issues or if the block has had water\/fluid run through it.\u003c\/p\u003e\u003cp\u003eThe manufacturer reserves the right to alter the block design to expand compatibility. The delivered item may not 100% match the pictured item. The product does NOT come with English instructions. Please see the product gallery images for the install guide if available. Generally, thermal pads should be installed on the card where the block has corresponding raised contact points, except the GPU core, which uses thermal paste. Installing pads on other components can lead to improper contact and poor performance.\u003c\/p\u003e\u003cp\u003eThis product is designed for self-installation. The manufacturer is not liable for any damages resulting from misuse, including, but not limited to, improper installation or the use of incompatible hardware or fluids. By using this product, you accept all related risks.\u003c\/p\u003e","brand":"Bykski","offers":[{"title":"Default Title","offer_id":41441338163298,"sku":"N-ML4070S-X","price":233.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0069\/8102\/5892\/files\/e0059eec-2cc4-42c0-b317-129e3f899fdd.jpg?v=1781325593"},{"product_id":"bykski-durable-metal-pom-gpu-water-block-and-backplate-for-galaxy-geforce-rtx-3090-24gb-classic-n-gy3090cl-sr-continuous-usage","title":"Bykski Durable Metal\/POM GPU Water Block and Backplate For GALAXY GEFORCE RTX 3090 24GB CLASSIC (N-GY3090CL-SR) - Continuous Usage","description":"\u003cp\u003eBuilt for continuous use, the N-GY3090CL-SR water block features a combination of metal and POM, ensuring both safety and longevity. Its stainless steel panel design allows for an ultra-slim profile of the GPU block.\u003c\/p\u003e\u003cp\u003eThe block is made from high-purity copper and is electroplated to avoid oxidation. Its high-flow design enables several blocks to function in series.\u003c\/p\u003e\u003ch5\u003eSpecifications\u003c\/h5\u003e\u003cul\u003e\n\u003cli\u003eBlock Material: Nickel Electroplated High Purity Copper \/ Stainless Steel \/ POM\u003c\/li\u003e\n\u003cli\u003eBackplate Material: Black Anodized Aluminum (not in contact with coolant)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch5\u003eCompatibility\u003c\/h5\u003e\u003cp\u003eONLY Compatible with\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eGALAXY GeForce RTX 3090 24GB Classic\u003c\/li\u003e\n\u003cli\u003eGALAXY GeForce RTX 3080 Reference Design Turbo\u003c\/li\u003e\n\u003cli\u003eGAINWARD GeForce RTX 3090 Blower Bulk 24GB\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch5\u003eParts Included\u003c\/h5\u003e\u003cul\u003e\n\u003cli\u003eGPU Water Cooling Block with backplate\u003c\/li\u003e\n\u003cli\u003eInstallation Hardware, including thermal paste\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch5\u003eWarnings\u003c\/h5\u003e\u003cp\u003eThis is a repair or replacement-only item. Returns are not accepted on compatibility issues or if the block has had water\/fluid run through it.\u003c\/p\u003e\u003cp\u003eThe product does NOT include printed instructions. Please check the product gallery images for the installation illustration. The manufacturer reserves the right to alter the block design to expand compatibility. The delivered item may not 100% match the pictured item.\u003cbr\u003e\u003cbr\u003eGenerally, thermal pads should be installed on the card where the block has corresponding raised contact points, except the GPU core, which uses thermal paste. Installing pads on other components can lead to improper contact and poor performance.\u003c\/p\u003e\u003cp\u003eThis product is designed for self-installation. The manufacturer is not liable for any damages resulting from misuse, including, but not limited to, improper installation or the use of incompatible hardware or fluids. By using this product, you accept all related risks.\u003c\/p\u003e","brand":"Bykski","offers":[{"title":"Default Title","offer_id":42377297789026,"sku":"N-GY3090CL-SR","price":323.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0069\/8102\/5892\/files\/f3c2ac47-ee51-4b5a-90fd-a7472b28b6c7.jpg?v=1781328884"},{"product_id":"bykski-full-coverage-gpu-water-block-w-integrated-active-backplate-for-asus-tuf-rtx-3090-24g-gaming-n-as3090tuf-tc-v2","title":"Bykski Full Coverage GPU Water Block w\/ Integrated Active Backplate for ASUS TUF RTX 3090 24G GAMING (N-AS3090TUF-TC-V2)","description":"\u003cp\u003eThis N-AS3090TUF-TC-V2 full-coverage block directly cools the video card core (GPU), graphics memory (RAM), and voltage regulator modules (VRM). By directly cooling these components, you can achieve great temperatures and reach higher overclocks while extending the overall lifespan of your card by running at lower temperatures.\u003c\/p\u003e\n\u003cp\u003eA high-flow design allows multiple blocks to run in series. The block can be configured as parallel or serial designs. In multi-block setups, an additional bridge may be needed, depending on your setup.\u003cimg\u003e\u003c\/p\u003e\n\u003ch5\u003eSpecifications\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eBlock Material: Nickel Electroplated High Purity Copper \/ PMMA (Acrylic)\u003c\/li\u003e\n\u003cli\u003eBackplate Material: Nickel Plated Copper with Acrylic Cover\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eCompatibility\u003c\/h5\u003e\n\u003cp\u003eONLY Compatible with\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eASUS TUF GAMING GEFORCE RTX 3080 Ti 12GB\u003c\/li\u003e\n\u003cli\u003eASUS TUF GAMING GEFORCE RTX 3080 Ti 12GB OC\u003c\/li\u003e\n\u003cli\u003eASUS TUF GAMING GEFORCE RTX 3080 10GB\u003c\/li\u003e\n\u003cli\u003eASUS TUF GAMING GEFORCE RTX 3090 24GB\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eParts Included\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eGPU Water Cooling Block\u003c\/li\u003e\n\u003cli\u003eInstallation Hardware, including thermal paste\u003c\/li\u003e\n\u003cli\u003e5v Addressable RGB (RBW)\u003c\/li\u003e\n\u003cli\u003e(Warning: Addressable RGB (RBW) is 5V and is ONLY compatible with Addressable RGB (RBW) components. RGB is 12V and is ONLY compatible with RGB components. Mix and match will NOT work and will cause damage.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eWarnings\u003c\/h5\u003e\n\u003cp\u003eThis is a repair or replacement-only item. Returns are not accepted on compatibility issues or if the block has had water\/fluid run through it.\u003c\/p\u003e\n\u003cp\u003eThe product does NOT include printed instructions. Please check the product gallery images for the installation illustration. The manufacturer reserves the right to alter the block design to expand compatibility. The delivered item may not 100% match the pictured item.\u003cbr\u003e\u003cbr\u003eGenerally, thermal pads should be installed on the card where the block has corresponding raised contact points, except the GPU core, which uses thermal paste. Installing pads on other components can lead to improper contact and poor performance.\u003c\/p\u003e\n\u003cp\u003eThis product is designed for self-installation. The manufacturer is not liable for any damages resulting from misuse, including, but not limited to, improper installation or the use of incompatible hardware or fluids. By using this product, you accept all related risks.\u003c\/p\u003e","brand":"Bykski","offers":[{"title":"Default Title","offer_id":42603236327522,"sku":"N-AS3090TUF-TC-V2","price":359.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0069\/8102\/5892\/files\/N-AS3090TUF-TC-V2.jpg?v=1781551944"}],"url":"https:\/\/www.bykski.us\/collections\/special-order-items.oembed?page=3","provider":"BYKSKI.US","version":"1.0","type":"link"}