SPEND $100 GET $15 OFF - SPEND $300 GET $50 OFF - SPEND $500 GET $75 OFF

Bykski AMD RADEON VII Full Coverage GPU Water Block - Clear (A-Radeon-VII-X)

SKU: A-Radeon-VII-X
Availability : In stock, In Boise ID USA Pre-Order Now Out of stock
$139.99 USD
Order in the next [totalHours] hours %M minutes to get it between and



The Bykski AMD RADEON VII Full Coverage GPU Water Block is a work of art! This full coverage block, directly cools the video cards core (GPU), graphics memory (RAM) as well as the voltage regulator modules (VRM). By directly cooling these components you can achieve great temperatures! Along with these temperatures comes the ability to reach higher overclocks or extend the overall lifespan of your card by running at below factory temps.

The block is constructed of high purity copper that is electroplated to prevent oxidation. A high flow design is used to allow multiple blocks to run in series. Top and bottom ports can be used to configure parallel or serial designs in multi block set ups.

  • Finest Craftmanship
  • Designed to Fit Standard G1/4 Thread Fittings
  • SLI/Crossfire Compliant
  • Model:A-Radeon-VII-X
  • Brand:Bykski
  • Material:Electroplated High Purity Copper / Clear Acrylic
  • (Including but not limited to the following models)
  • AMD RADEON VII (full compatibility will be updated ASAP)
  • Fittings:G 1/4 Thread
  • Stock Backplates:Due to mounting variances between cards, stock backplates not guaranteed to fit.
Parts Included
  • 1x Full Coverage GPU Water Block
  • 2x Stop Fitting
  • 1x Mounting Hardware
  • Thermal grease
  • 1x 5v Addressable RGB (RBW)

This is a repair or replace only item. Returns not accepted on compatibility issues or block has had water/fluid run through it.

Manufacturer reserves right to alter block design to expand compatibility. Delivered item may not 100% match pictured item. Product does NOT come with English instructions. is not responsible for any damage caused by or when using this product. Please use at your own risk.

Reviews | Q&A

Customer Reviews

Based on 2 reviews
Donn G Eddy II
Pretty good.

Junction temps dropped from 115c at 1900MHz on air to 84c at 2050MHz.
Installation was easy. The block came with plenty of thermal pads that were easy to install.
However, there are two downsides, and one subjective factor to discuss.
The downsides:
There not enough screws to fill all the spots (6 short). Also, 2 of the backplate **** holes lack any way to receive the screws.
The instructions are all in Chinese. This is not too bad overall, but understand that you will only be able to see the pictures. On that note, there are two things I would recommend doing on install: on all of the screws, use the included plastic washers. Also, on the stand off style nuts on the block, use the plastic spacers.
The look of the block is average. The RGB is quite bright and makes it ok in my opinion. I wish the terminal was black.
Overall, it is good. The lack of screws is not a major downside.

Good but 1 start from great but why?

Two things: 1) Stock performance was horrible.
I had to remove the waterblock and lap where it meets the GPU! I dry lapped with 800 grit sandpaper then wet lap and washed it smooth. There were very sharp ridges where the waterblock was milled on the surface where it meets the GPU. I ran my finger nail across the surface and it was getting hung up on those walls where the milling bit left an indentation. This was causing serious thermal issues as it left the thermal paste to fill the gaps. I also decided to replace the stock paste with Thermal Grizzly Kryonaut. Its now done some serious wonders. Can you believe I went from temp of 75C with a junction temp of 122C using this waterblock to now max 52C and junction temp 88C peaking at 1991MHz on the GPU with its own autoboost after more than half an hour of gaming. Stock cooler junction temp was 101C.
2) The included manual was in a foreign language
I e-mailed support and promptly got an English version but it was also just as horrible. I used intuition and did it my way. I removed the springs from the short screws to clamp down the board. And I used the original GPU X bracket with the longer screws and the springs from the shorter screws to clamp it down similar to the original method. I also reinstalled the original back plate. I was skeptical at first but its doing a pretty good job.

The RGB is just an added bonus. QC if you are reading this review, fix those two issues and you have your self a 5 star product.

Return/Exchange/Shipping Policy

Return Policy for New Products:

For international customers please reference this page for duties/tax information.

Products returned for credit must be received within 20 days of invoice date and a 15% restocking fee will apply. If 20 days have gone by since your purchase, unfortunately we can’t offer you a refund or exchange.

All returned items must be in like new condition with all related parts including screws, manuals, etc. If you have lost, thrown away, scratched or opened sealed boxes or bags – a higher restock fee may apply upwards of 50%.

If a customer is misleading about the defect and evidence of incorrect install/use or tampering has occurred, a higher restock fee may be assessed or the return may be completely denied. A qualified technician will test each returned product for defects. will not assess a restocking fee for defective products.

Sale items  or Pre-owned (if applicable)
Only regular priced new items may be refunded or returned, unfortunately sale items and Used/Pre-owned/Open box items cannot be refunded.

Returns will not be accepted without an RMA number provided from 

Return Shipping
Customers are responsible for ALL return shipping charges on merchandise for any reason. Unless otherwise noted, shipping on products and returns is non-refundable, and returning a product comes at the expense of the customer. Customer will be responsible for paying shipping products/orders back to Shipping costs are non-refundable. 

Depending on where you live, the time it may take for your exchanged product to reach you, may vary.

Please ship using a carrier that provides a tracking number, insurance and proof of delivery. is not responsible for return items lost by the carrier. Valid proof of delivery must include the receipt signature of an authorized employee.

Erroneous Shipments
In the event an incorrect item is shipped in your order, the correct item / replacement will be shipped using the same method as the original order.

Damaged Items:  All packages are fully insured at no additional charge.

If you receive a damaged package, you must notify us within 48 hours of receipt. Sending back damaged merchandise voids the shipping insurance and no credit will be given. Damaged packages must be held for five days with original packaging for carrier inspection.

Shipment Refusal

If a shipped order is refused or returned undelivered there will be a mandatory 20% restocking fee, a $20.00 Return Service Fee and no refund on the shipping cost. Please be aware that refusal is significantly more expensive then using your own carrier and is NOT recommended.Please note: Refusal of packages due to duties and taxes will still result in brokerage fees and return shipping costs to us being deducted from your refund. These fees are usually higher than what paying the initial fees would have been.


Shipping Policy

Selecting overnight shipping method will not ensure that your order ships same day and is not guaranteed.



Any and all orders over $100.00USD that are cancelled will have a 10% restock fee assessed, unless an in-store credit is issued for future purchases, then the restock fee is waived. Please double check your orders before checkout! Combining of orders/changes of orders is not permitted and cancelling and re-order will place your order to the back of the queue. We offer heavily discounted shipping rates to offset any additional items you may need. We will not refund shipping costs for any reason.