Fittings & Tubing
Every Bykski block, radiator and pump uses the same G1/4 port thread. What you need to match is the fitting to the size of your tube.
Browse fittings and tubing
Best sellers in fittings and tubing
How to pick fittings and tubing
Soft tube is easier to fit and to change later. Hard tube looks cleaner but needs a heat gun and bending tools. The fittings are different for each, so decide first.
Soft tube is sized by inside and outside diameter, such as 10/13 mm or 10/16 mm, and the fitting must match both. Hard tube is sized by outside diameter only, such as 14 mm or 16 mm.
Plan two fittings for every block, radiator and reservoir, plus every elbow and extension. A couple of spares saves waiting on a second order.
About Bykski fittings and tubing
G1/4 is the port thread on every block, radiator, pump top and reservoir we sell.
The tube is where sizes differ. Soft tubing is listed by inside and outside diameter, for example 10/13 mm or 10/16 mm, and the fitting has to match both numbers. Hard tubing is listed by outside diameter, usually 12, 14 or 16 mm, and uses its own fittings.
Elbows and extensions help the tubing reach without kinking or pressing on other parts. Each one adds a little restriction, so use them where they are needed.
Not sure what you need?
Send us your list of parts and the tube you plan to use. We will count the fittings for you.






