Home / Pumps & Reservoirs

Pumps & Reservoirs

Most custom loops use one of two pump types, D5 or DDC. Choose the pump first, then a reservoir that holds it, or a combo that has both.

How to pick a pump

01
Pick D5 or DDC

A D5 is larger and quieter and moves more coolant through an open loop. A DDC is smaller and pushes harder, which helps in a loop with many blocks or a distro plate.

02
Combo or separate tank

A pump and reservoir combo means fewer fittings and fewer joints. A separate tank is easier to fill and to service.

03
Plan where it mounts

Decide where the pump will sit before you build, and leave room to reach it later. Our pump brackets give you more places to mount it.

Putting several blocks in one loop? Send us the parts list and we will check that the pump is strong enough.

About Bykski pumps and reservoirs

D5 and DDC are the two pump standards used in most custom loops. A D5 is larger and quieter and suits a loop with little restriction. A DDC is smaller and builds more pressure, which suits a loop with several blocks in a row.

Reservoirs come as tube reservoirs, as pump and reservoir combos, and built into distro plates. A combo has fewer joints. A separate reservoir is easier to fill and service.

Building a loop from scratch?

Send us the parts list, including blocks, radiator and case, and we will tell you what is missing before you order.