Bykski Full Coverage GPU Water Block and Backplate for ZOTAC Gaming RTX 4080 Trinity (N-ST4080TQ-X)

SKU: N-ST4080TQ-X
Availability : In stock, In Boise ID USA Pre-Order Now Out of stock
$194.99 USD
Order in the next [totalHours] hours %M minutes to get it between and

HURRY! ONLY LEFT IN STOCK.

Description

This full coverage block directly cools the video cards core (GPU), graphics memory (RAM), and voltage regulator modules (VRM). By directly cooling these components, you can achieve great temperatures along with the ability to reach higher overclocks or extend the overall lifespan of your card by running at below factory temps.

The block is constructed of high-purity copper that is nickel electroplated to prevent oxidation. A high-flow design is used to allow multiple blocks to run in series. Top and bottom ports can be used to configure parallel or serial designs in multi-block setups.

Specifications
  • Block Material: Nickel Electroplated High Purity Copper / Acrylic
  • Backplate Material: Black Anodized Aluminum (not in contact with coolant)
Compatibility
  • (Including but not limited to the following models)
  • Compatible with ZOTAC Gaming GeForce RTX 4080, ZOTAC GeForce RTX 4080 AMP Extreme AIRO, ZOTAC Gaming GeForce RTX 4080 Trinity OC , ZOTAC Gaming GeForce RTX 4080 Trinity
  • Please check over the entire PCB picture after narrowing your selection to ensure compatibility. If you have any questions, please contact support for confirmation.
  • Compatibility based on these circuit board designs only
  • Fittings: G 1/4in. Thread
Parts Included
  • 1x Full Coverage GPU Water Block
  • 1x Backplate
  • 2x Stop Fitting
  • 1x Mounting Hardware
  • Thermal grease
  • 1x 5v A-RGB (RBW) Light
  • (Warning: Addressable RGB (RBW) is 5V and is ONLY compatible with Addressable RGB (RBW) components. RGB is 12V and is ONLY compatible with RGB components. Mix and match will NOT work and will cause damage.
Warnings

This is a repair or replacement-only item. Returns are not accepted on compatibility issues or if the block has had water/fluid run through it.

The manufacturer reserves the right to alter the block design to expand compatibility. The delivered item may not 100% match the pictured item. The product does NOT come with English instructions. Please see the product gallery images for the install guide if available. Generally, thermal pads should be installed on the card where the block has corresponding raised contact points, except the GPU core, which uses thermal paste. Installing pads on other components can lead to improper contact and poor performance.

Not responsible for any damage caused by or when using this product. Please use it at your own risk.

Reviews | Q&A

Customer Reviews

Based on 2 reviews
50%
(1)
0%
(0)
50%
(1)
0%
(0)
0%
(0)
H
H.
Don't sleep on this Company

I purchased this product with excitement. Although, I've never heard of this company before. But since they offered this water block for my ZOTAC 4080, I decided to give them a shot. And let me add that this company ships out products very fast if you purchase early the same day, they will ship it out same day. And when you receive it, You will be pleased at the packaging. Not to mention you get 2 free Sour Patches. Yes, I did say Sour Patches (The Candy). Anyway, I am super pleased with the product. Easy installation. The In-N-Out holes, are embedded onto the plexiglass. I am super pleased with this company and I will purchase from them again. So far I've purchased this GPU Water Block, I've also purchased a CPU Water Block, and 2x 360mm Radiators all BYKSKI. If you know what you doing, You will be content with this product and company. Sadly, there are not that much reviews of this company out there on YouTube. BYKSKI, if you're reading this hook a brother up with some products I'll definitely start a YouTube to review them. :)

E
Ed H.
3 stars that would be easy to make 5!

It would be very easy to get the rating to 5 stars by including the RIGHT instructions with the water block. Mine arrived with instructions for a motherboard. The QR Code sent me to a Chinese version of the website that did not even show the 30 or 40 series water blocks. So yeah, had to go online and search youtube for videos on where to put the thermal pads and get everything properly assembled. The other thing that needs to be addressed is better markings on IN/OUT ports.. They do it in WHITE and it is very had to see when surrounded by clear. I had to re-arrange half the tubes in my loop because of that poor marking. It probably would have been stated in the PAPER IINSTRUCTIONS had I gotten the right instructions to begin with.

Other than that, it is working amazingly well. This being my first hard line water cooled build, I have had NO leaks of any kind from the water block. The RGB lights up amazingly well, and it works great at keeping temps well under control.

https://youtu.be/li2ID8XrWjA

Judge.me YouTube video placeholder
Return/Exchange/Shipping Policy

Return Policy for New Products:

For international customers please reference this page for duties/tax information.


Products returned for credit must be received within 30 days of the invoice, and a 15% restocking fee will apply. If your order was sent using "free shipping," the amount for outbound shipping will be deducted from your refund. If 30 days have passed since your purchase, unfortunately, we can’t offer you a refund or exchange.

All returned items must be in like new condition with all related parts including screws, manuals, etc. If you have lost, thrown away, scratched or opened sealed boxes or bags – a higher restock fee may apply upwards of 50%.

If a customer is misleading about the defect and evidence of incorrect install/use or tampering has occurred, a higher restock fee may be assessed or the return may be completely denied. A qualified Bykski.us technician will test each returned product for defects.

Bykski.us will not assess a restocking fee for defective products.

Sale items  or Pre-owned (if applicable)
Only regular priced new items may be refunded or returned, unfortunately sale items and Used/Pre-owned/Open box items cannot be refunded.

Returns will not be accepted without an RMA number provided from support@bykski.us. 

Return Shipping

Customers are responsible for ALL return shipping charges on merchandise for any reason. Unless otherwise noted, shipping on products and returns is non-refundable, and returning a product comes at the customer's expense. The customer will be responsible for paying for shipping products/orders back to PrimoChill.com. For no reason, do we refund the outbound shipping cost. If your order was sent using "free shipping," the amount for outbound shipping will be deducted from your refund.

Depending on where you live, the time it may take for your exchanged product to reach you, may vary.

Please ship using a carrier that provides a tracking number, insurance and proof of delivery. Bykski.us is not responsible for return items lost by the carrier. Valid proof of delivery must include the receipt signature of an authorized Bykski.us employee.

Erroneous Shipments
In the event an incorrect item is shipped in your order, the correct item / replacement will be shipped using the same method as the original order.

Damaged Items
:  All packages are fully insured at no additional charge.

If you receive a damaged package, you must notify us within 48 hours of receipt. Sending back damaged merchandise voids the shipping insurance and no credit will be given. Damaged packages must be held for five days with original packaging for carrier inspection.

Shipment Refusal

Shipping Policy

Selecting overnight shipping method will not ensure that your order ships same day and is not guaranteed.

Cancellations/Changes:

Once an order is placed on our e-commerce website, it cannot be canceled/changed or held. This is because our fully automated systems immediately start processing the order, which cannot be stopped or reversed. Therefore, we advise customers to double-check their orders before making a purchase.

Additionally, we would like to emphasize that our e-commerce website ships 98.5% of orders on the same day they are placed by 2:00 pm MST. Allowing cancellations after an order is placed would significantly slow down our shipping process and potentially affect the delivery times for other customers.

We understand that it can be frustrating to be unable to cancel an order, but we ask for your understanding in this matter. By adhering to our cancellation policy, we can ensure that our automated systems and shipping processes continue running smoothly, allowing us to provide fast and efficient service to all our customers.

We understand that sometimes mistakes can happen, and customers may accidentally order the wrong item or change their minds about a purchase. In such cases, we suggest that customers consider our return policy instead.

PRE-ORDER ITEMS

Most of the time pre-ordered items are newly released products and may be subject to price increases and feature changes as more information is provided to us the reseller. 

The item's packaging (dimensions, weight, additional handling, shipping rate changes), delivery schedule and included options are subject to change and therefore the original estimated price listed and delivery date may change once the final information is received. As we get more information about the packaging, pricing, and inclusions, the final features/pricing may change before fulfillment. 

In the event of a price change or feature change the customer will be notified immediately and will be given the option to cancel the order, change the order or pay additional funds to cover the increases.